Discussion:
IDE-SCSI oops in 2.6.0-test11
(too old to reply)
r***@uk.neceur.com
2003-12-02 12:43:55 UTC
Permalink
CPU: Athlon-XP 2700+
MB: ASUS A7N8X Deluxe
Memory: 3 x 512MB
Notes: UP kernel, standard EIDE driver, boot paramters acpi=off
nolapic,noapic
Libc: glibc-2.3.2 with linuxthreads.

This error occurs while trying to write a DVD+RW to an NEC-1300A DVD
writer
using cdrecord-dvdpro executable (no source available). This works fine
on linux-2.4.23.

Dec 2 11:39:56 mig27 kernel: Linux version 2.6.0-test11 (***@mig27) (gcc
version 3.3.2) #9 Tue Dec 2 09:00:15 GMT 2003
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 0000000000100000 -
000000005fff0000 (usable)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000005fff0000 -
000000005fff3000 (ACPI NVS)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000005fff3000 -
0000000060000000 (ACPI data)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Dec 2 11:39:56 mig27 kernel: user: 0000000000000000 - 000000000009fc00
(usable)
Dec 2 11:39:57 mig27 kernel: user: 000000000009fc00 - 00000000000a0000
(reserved)
Dec 2 11:39:57 mig27 kernel: user: 00000000000f0000 - 0000000000100000
(reserved)
Dec 2 11:39:57 mig27 kernel: user: 0000000000100000 - 000000005fff0000
(usable)
Dec 2 11:39:57 mig27 kernel: On node 0 totalpages: 393200
Dec 2 11:39:57 mig27 kernel: DMA zone: 4096 pages, LIFO batch:1
Dec 2 11:39:57 mig27 kernel: Normal zone: 225280 pages, LIFO batch:16
Dec 2 11:39:57 mig27 kernel: HighMem zone: 163824 pages, LIFO batch:16
Dec 2 11:39:57 mig27 kernel: Building zonelist for node : 0
Dec 2 11:39:57 mig27 kernel: Kernel command line: root=/dev/hda1 vga=773
acpi=off nolapic noapic mem=1572800K
Dec 2 11:39:57 mig27 kernel: PID hash table entries: 4096 (order 12:
32768 bytes)
Dec 2 11:39:57 mig27 kernel: Detected 2162.490 MHz processor.
Dec 2 11:39:57 mig27 kernel: Console: colour dummy device 80x25
Dec 2 11:39:57 mig27 kernel: Calibrating delay loop... 4276.22 BogoMIPS
Dec 2 11:39:57 mig27 kernel: Inode-cache hash table entries: 131072
(order: 7, 524288 bytes)
Dec 2 11:39:57 mig27 kernel: Mount-cache hash table entries: 512 (order:
0, 4096 bytes)
Dec 2 11:39:57 mig27 kernel: CPU: AMD Athlon(tm) XP 2700+ stepping 01
Dec 2 11:39:57 mig27 kernel: POSIX conformance testing by UNIFIX
Dec 2 11:39:57 mig27 kernel: ACPI: ACPI tables contain no PCI IRQ routing
entries
Dec 2 11:39:57 mig27 kernel: PCI: Invalid ACPI-PCI IRQ routing table
Dec 2 11:39:57 mig27 kernel: PCI: Probing PCI hardware
Dec 2 11:39:57 mig27 kernel: PCI: Probing PCI hardware (bus 00)
Dec 2 11:39:57 mig27 kernel: highmem bounce pool size: 64 pages
Dec 2 11:39:57 mig27 kernel: Console: switching to colour frame buffer
device 128x48
Dec 2 11:39:57 mig27 kernel: pty: 256 Unix98 ptys configured
Dec 2 11:39:57 mig27 kernel: hda: ST380021A, ATA DISK drive
Dec 2 11:39:57 mig27 kernel: hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM
drive
Dec 2 11:39:57 mig27 kernel: hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM
drive
Dec 2 11:39:57 mig27 kernel: Using anticipatory io scheduler
Dec 2 11:39:57 mig27 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 2 11:39:57 mig27 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 2 11:39:57 mig27 kernel: hda: max request size: 128KiB
Dec 2 11:39:57 mig27 kernel: Console: switching to colour frame buffer
device 128x48
Dec 2 11:39:57 mig27 kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Dec 2 11:39:57 mig27 kernel: 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
Dec 2 11:40:28 mig27 kernel: mtrr: 0xd0000000,0x4000000 overlaps existing
0xd0000000,0x1000000
Dec 2 11:40:33 mig27 kernel: spurious 8259A interrupt: IRQ7.
Dec 2 11:42:56 mig27 kernel: hdc: ATAPI 52X CD-ROM drive, 128kB Cache
Dec 2 11:42:56 mig27 kernel: hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive,
2048kB Cache
Dec 2 11:51:36 mig27 kernel: ide-scsi is deprecated for cd burning! Use
ide-cd and give dev=/dev/hdX as device
Dec 2 11:51:43 mig27 kernel: ahc_pci:1:10:0: Host Adapter Bios disabled.
Using default SCSI device parameters
Dec 2 11:51:43 mig27 kernel: <Adaptec 2902/04/10/15/20/30C SCSI
adapter>
Dec 2 11:51:43 mig27 kernel: aic7850: Single Channel A, SCSI
Id=7, 3/253 SCBs
Dec 2 11:51:43 mig27 kernel:
Dec 2 11:51:58 mig27 kernel: (scsi2:A:1): 10.000MB/s transfers
(10.000MHz, offset 15)
Dec 2 11:53:20 mig27 kernel: sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2
cdda tray
Dec 2 11:53:20 mig27 kernel: sr1: scsi3-mmc drive: 40x/40x writer cd/rw
xa/form2 cdda tray
Dec 2 11:53:20 mig27 kernel: sr2: scsi3-mmc drive: 16x/40x cd/rw xa/form2
cdda tray
Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000000
Dec 2 12:02:46 mig27 kernel: printing eip:
Dec 2 12:02:46 mig27 kernel: 00000000
Dec 2 12:02:46 mig27 kernel: *pde = 00000000
Dec 2 12:02:46 mig27 kernel: Oops: 0000 [#1]
Dec 2 12:02:46 mig27 kernel: CPU: 0
Dec 2 12:02:46 mig27 kernel: EIP: 0060:[<00000000>] Not tainted
Dec 2 12:02:46 mig27 kernel: EFLAGS: 00210202
Dec 2 12:02:46 mig27 kernel: EIP is at 0x0
Dec 2 12:02:46 mig27 kernel: eax: c0354f10 ebx: c035516c ecx:
00000000 edx: 00000170
Dec 2 12:02:46 mig27 kernel: esi: f623e400 edi: f6ed4fc0 ebp:
e4161be0 esp: e4161bb8
Dec 2 12:02:46 mig27 kernel: ds: 007b es: 007b ss: 0068
Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369,
threadinfo=e4160000 task=f65d4100)
Dec 2 12:02:46 mig27 kernel: Stack: f9859b1b c035516c f623e400 0000000c
00000000 0000001e f6ed4fc0 c035516c
Dec 2 12:02:46 mig27 kernel: 00000000 f6f9b240 e4161c0c c01ff25a
c035516c f623e400 00000000 00000000
Dec 2 12:02:46 mig27 kernel: 0000001e 0000000f f6f9b240 c035516c
c0354f10 e4161c38 c01ff570 c035516c
Dec 2 12:02:46 mig27 kernel: Call Trace:
Dec 2 12:02:46 mig27 kernel: [<f9859b1b>]
idescsi_transfer_pc+0x11b/0x120 [ide_scsi]
Dec 2 12:02:46 mig27 kernel: [<c01ff25a>] start_request+0x16a/0x270
Dec 2 12:02:46 mig27 kernel: [<c01ff570>] ide_do_request+0x1e0/0x360
Dec 2 12:02:46 mig27 kernel: [<c01f3587>] __elv_add_request+0x27/0x40
Dec 2 12:02:46 mig27 kernel: [<c01ffd5e>] ide_do_drive_cmd+0xce/0x170
Dec 2 12:02:46 mig27 kernel: [<f985a36b>] idescsi_queue+0x1fb/0x630
[ide_scsi]
Dec 2 12:02:46 mig27 kernel: [<f993171f>]
scsi_init_cmd_from_req+0xcf/0x150 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f993159e>] scsi_dispatch_cmd+0x14e/0x200
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f99317a0>] scsi_done+0x0/0x70 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f9933ae0>] scsi_times_out+0x0/0x50
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f993631d>] scsi_request_fn+0x1cd/0x320
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<c01f5b0c>] blk_insert_request+0x7c/0xd0
Dec 2 12:02:46 mig27 kernel: [<f9934ffb>]
scsi_insert_special_req+0x3b/0x40 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f98c3eb1>] sg_common_write+0x161/0x1d0
[sg]
Dec 2 12:02:46 mig27 kernel: [<f98c5290>] sg_cmd_done+0x0/0x280 [sg]
Dec 2 12:02:46 mig27 kernel: [<f98c3c73>] sg_new_write+0x1c3/0x2a0 [sg]
Dec 2 12:02:46 mig27 kernel: [<f98c4c09>] sg_ioctl+0xce9/0xf20 [sg]
Dec 2 12:02:46 mig27 kernel: [<c0204812>] pre_task_mulout_intr+0x82/0x90
Dec 2 12:02:46 mig27 kernel: [<c01afee4>] __delay+0x14/0x20
Dec 2 12:02:46 mig27 kernel: [<c02037fe>] do_rw_taskfile+0x12e/0x2b0
Dec 2 12:02:46 mig27 kernel: [<c01faff3>]
as_remove_queued_request+0x83/0x120
Dec 2 12:02:46 mig27 kernel: [<c020a194>] lba_28_rw_disk+0xa4/0xb0
Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
Dec 2 12:02:46 mig27 kernel: [<c011cbf0>] default_wake_function+0x0/0x20
Dec 2 12:02:46 mig27 kernel: [<c01103ea>] do_gettimeofday+0x2a/0xc0
Dec 2 12:02:46 mig27 kernel: [<c01666d4>] sys_ioctl+0xf4/0x2a0
Dec 2 12:02:46 mig27 kernel: [<c010a36f>] syscall_call+0x7/0xb
Dec 2 12:02:46 mig27 kernel:
Dec 2 12:02:46 mig27 kernel: Code: Bad EIP value.

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not se
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_IOCTL_V4=y

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C bit-banging
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Algorithms
#

#
# I2C Hardware Bus support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC32=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

---------------------------------------------------------------------------------
Ross Alexander "We demand clearly defined
MIS - NEC Europe Limited boundaries of uncertainty and
Work ph: +44 20 8752 3394 doubt."
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Ed Sweetman
2003-12-02 13:28:40 UTC
Permalink
Post by r***@uk.neceur.com
CPU: Athlon-XP 2700+
MB: ASUS A7N8X Deluxe
Memory: 3 x 512MB
Notes: UP kernel, standard EIDE driver, boot paramters acpi=off
nolapic,noapic
Libc: glibc-2.3.2 with linuxthreads.
This error occurs while trying to write a DVD+RW to an NEC-1300A DVD
writer
using cdrecord-dvdpro executable (no source available). This works fine
on linux-2.4.23.
First off, acpi should be working just fine now...should have been for
the last couple versions of 2.6.0-test.
Second, you probably shouldn't be using ide-scsi. ATAPI works just fine
using straight ide for CDR's so it probably works fine for DVD-R+R+RW
whatever stupid acronymn they're using today.
Third, you didn't post the actual oops so how is anyone supposed t osay
anything about this problem?
Fourth, you are using a binary you didn't compile that's probably
compiled against headers for api's found in 2.4.x which is seriously
different from the kernel you're running it on. Compile your own
cdrecord and see how it goes.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
r***@uk.neceur.com
2003-12-02 14:09:45 UTC
Permalink
ACPI works fine but LAPIC doesn't. If I turn ACPI I have to add
pci=noacpi. It
is safer to turn the whole beast off.

The Oops was at the end of the syslog output. Maybe I should have put it
at the start.

I can't get the source, otherwise I would have compiled it against 2.6.0.
However
I don't find this point particularly relevant since 2.6.0 should be
backward compatible
with 2.4,0, atleast at the binary level.

I tried the earlier versions of dvdrtools and cdrtools and their didn't
like ide-cd. This
version (cdrecord-dvdpro) does but it still don't alter the fact that
while using ide-scsi
is no longer recommended, it still should work.

Here the the oops again.

Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000000
Dec 2 12:02:46 mig27 kernel: printing eip:
Dec 2 12:02:46 mig27 kernel: 00000000
Dec 2 12:02:46 mig27 kernel: *pde = 00000000
Dec 2 12:02:46 mig27 kernel: Oops: 0000 [#1]
Dec 2 12:02:46 mig27 kernel: CPU: 0
Dec 2 12:02:46 mig27 kernel: EIP: 0060:[<00000000>] Not tainted
Dec 2 12:02:46 mig27 kernel: EFLAGS: 00210202
Dec 2 12:02:46 mig27 kernel: EIP is at 0x0
Dec 2 12:02:46 mig27 kernel: eax: c0354f10 ebx: c035516c ecx:
00000000 edx: 00000170
Dec 2 12:02:46 mig27 kernel: esi: f623e400 edi: f6ed4fc0 ebp:
e4161be0 esp: e4161bb8
Dec 2 12:02:46 mig27 kernel: ds: 007b es: 007b ss: 0068
Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369,
threadinfo=e4160000 task=f65d4100)
Dec 2 12:02:46 mig27 kernel: Stack: f9859b1b c035516c f623e400 0000000c
00000000 0000001e f6ed4fc0 c035516c
Dec 2 12:02:46 mig27 kernel: 00000000 f6f9b240 e4161c0c c01ff25a
c035516c f623e400 00000000 00000000
Dec 2 12:02:46 mig27 kernel: 0000001e 0000000f f6f9b240 c035516c
c0354f10 e4161c38 c01ff570 c035516c
Dec 2 12:02:46 mig27 kernel: Call Trace:
Dec 2 12:02:46 mig27 kernel: [<f9859b1b>]
idescsi_transfer_pc+0x11b/0x120 [ide_scsi]
Dec 2 12:02:46 mig27 kernel: [<c01ff25a>] start_request+0x16a/0x270
Dec 2 12:02:46 mig27 kernel: [<c01ff570>] ide_do_request+0x1e0/0x360
Dec 2 12:02:46 mig27 kernel: [<c01f3587>] __elv_add_request+0x27/0x40
Dec 2 12:02:46 mig27 kernel: [<c01ffd5e>] ide_do_drive_cmd+0xce/0x170
Dec 2 12:02:46 mig27 kernel: [<f985a36b>] idescsi_queue+0x1fb/0x630
[ide_scsi]
Dec 2 12:02:46 mig27 kernel: [<f993171f>]
scsi_init_cmd_from_req+0xcf/0x150 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f993159e>] scsi_dispatch_cmd+0x14e/0x200
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f99317a0>] scsi_done+0x0/0x70 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f9933ae0>] scsi_times_out+0x0/0x50
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f993631d>] scsi_request_fn+0x1cd/0x320
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<c01f5b0c>] blk_insert_request+0x7c/0xd0
Dec 2 12:02:46 mig27 kernel: [<f9934ffb>]
scsi_insert_special_req+0x3b/0x40 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f98c3eb1>] sg_common_write+0x161/0x1d0
[sg]
Dec 2 12:02:46 mig27 kernel: [<f98c5290>] sg_cmd_done+0x0/0x280 [sg]
Dec 2 12:02:46 mig27 kernel: [<f98c3c73>] sg_new_write+0x1c3/0x2a0 [sg]
Dec 2 12:02:46 mig27 kernel: [<f98c4c09>] sg_ioctl+0xce9/0xf20 [sg]
Dec 2 12:02:46 mig27 kernel: [<c0204812>] pre_task_mulout_intr+0x82/0x90
Dec 2 12:02:46 mig27 kernel: [<c01afee4>] __delay+0x14/0x20
Dec 2 12:02:46 mig27 kernel: [<c02037fe>] do_rw_taskfile+0x12e/0x2b0
Dec 2 12:02:46 mig27 kernel: [<c01faff3>]
as_remove_queued_request+0x83/0x120
Dec 2 12:02:46 mig27 kernel: [<c020a194>] lba_28_rw_disk+0xa4/0xb0
Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
Dec 2 12:02:46 mig27 kernel: [<c011cbf0>] default_wake_function+0x0/0x20
Dec 2 12:02:46 mig27 kernel: [<c01103ea>] do_gettimeofday+0x2a/0xc0
Dec 2 12:02:46 mig27 kernel: [<c01666d4>] sys_ioctl+0xf4/0x2a0
Dec 2 12:02:46 mig27 kernel: [<c010a36f>] syscall_call+0x7/0xb
Dec 2 12:02:46 mig27 kernel:
Dec 2 12:02:46 mig27 kernel: Code: Bad EIP value.

Cheers,

Ross

---------------------------------------------------------------------------------
Ross Alexander "We demand clearly defined
MIS - NEC Europe Limited boundaries of uncertainty and
Work ph: +44 20 8752 3394 doubt."




Ed Sweetman <***@wmich.edu>
02/12/2003 01:26 p.m.

To: ***@uk.neceur.com
cc: linux-***@vger.kernel.org
Subject: Re: IDE-SCSI oops in 2.6.0-test11
Post by r***@uk.neceur.com
CPU: Athlon-XP 2700+
MB: ASUS A7N8X Deluxe
Memory: 3 x 512MB
Notes: UP kernel, standard EIDE driver, boot paramters acpi=off
nolapic,noapic
Libc: glibc-2.3.2 with linuxthreads.
This error occurs while trying to write a DVD+RW to an NEC-1300A DVD
writer
using cdrecord-dvdpro executable (no source available). This works fine
on linux-2.4.23.
First off, acpi should be working just fine now...should have been for
the last couple versions of 2.6.0-test.
Second, you probably shouldn't be using ide-scsi. ATAPI works just fine
using straight ide for CDR's so it probably works fine for DVD-R+R+RW
whatever stupid acronymn they're using today.
Third, you didn't post the actual oops so how is anyone supposed t osay
anything about this problem?
Fourth, you are using a binary you didn't compile that's probably
compiled against headers for api's found in 2.4.x which is seriously
different from the kernel you're running it on. Compile your own
cdrecord and see how it goes.



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Len Brown
2003-12-02 16:55:04 UTC
Permalink
Post by r***@uk.neceur.com
ACPI works fine but LAPIC doesn't.
Does it work if you build ACPI into the kernel, but exclude local APIC?

CONFIG_ACPI=y
CONFIG_X86_UP_APIC=n
CONFIG_X86_LOCAL_APIC=n

Or perhaps the "nolapic" boot-time option is effective?


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Linus Torvalds
2003-12-02 18:39:59 UTC
Permalink
Post by r***@uk.neceur.com
I can't get the source, otherwise I would have compiled it against
2.6.0. However I don't find this point particularly relevant since
2.6.0 should be backward compatible with 2.4,0, atleast at the binary
level.
I tried the earlier versions of dvdrtools and cdrtools and their didn't
like ide-cd. This version (cdrecord-dvdpro) does but it still don't
alter the fact that while using ide-scsi is no longer recommended, it
still should work.
Well, we're trying, but nobody has had a lot of luck with it.
Post by r***@uk.neceur.com
Here the the oops again.
Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
Dec 2 12:02:46 mig27 kernel: 00000000
Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369, threadinfo=e4160000 task=f65d4100)
Dec 2 12:02:46 mig27 kernel: [<f9859b1b>] idescsi_transfer_pc+0x11b/0x120 [ide_scsi]
That's the code that does:

...
if (test_bit (PC_DMA_OK, &pc->flags)) {
set_bit (PC_DMA_IN_PROGRESS, &pc->flags);
(void) (HWIF(drive)->ide_dma_begin(drive));
}
...

and it looks like the PC_DMA_OK flag is incorrect.

Doing a bit more digging shows that "idescsi_issue_pc()" seems to use some
variables without ever actually _initializing_ them. How about this
trivial one-liner? Does that make it work for you?

Jens? Comments?

Linus

---
===== drivers/scsi/ide-scsi.c 1.33 vs edited =====
--- 1.33/drivers/scsi/ide-scsi.c Tue Nov 18 23:40:45 2003
+++ edited/drivers/scsi/ide-scsi.c Tue Dec 2 10:36:33 2003
@@ -516,6 +516,7 @@
pc->actually_transferred=0; /* We haven't transferred any data yet */
pc->current_position=pc->buffer;
bcount.all = IDE_MIN(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */
+ feature.all = 0;

if (drive->using_dma && rq->bio) {
if (test_bit(PC_WRITING, &pc->flags))
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Jens Axboe
2003-12-03 09:10:09 UTC
Permalink
Post by Linus Torvalds
Post by r***@uk.neceur.com
I can't get the source, otherwise I would have compiled it against
2.6.0. However I don't find this point particularly relevant since
2.6.0 should be backward compatible with 2.4,0, atleast at the binary
level.
I tried the earlier versions of dvdrtools and cdrtools and their didn't
like ide-cd. This version (cdrecord-dvdpro) does but it still don't
alter the fact that while using ide-scsi is no longer recommended, it
still should work.
Well, we're trying, but nobody has had a lot of luck with it.
Post by r***@uk.neceur.com
Here the the oops again.
Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
Dec 2 12:02:46 mig27 kernel: 00000000
Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369, threadinfo=e4160000 task=f65d4100)
Dec 2 12:02:46 mig27 kernel: [<f9859b1b>] idescsi_transfer_pc+0x11b/0x120 [ide_scsi]
...
if (test_bit (PC_DMA_OK, &pc->flags)) {
set_bit (PC_DMA_IN_PROGRESS, &pc->flags);
(void) (HWIF(drive)->ide_dma_begin(drive));
}
...
and it looks like the PC_DMA_OK flag is incorrect.
Doing a bit more digging shows that "idescsi_issue_pc()" seems to use some
variables without ever actually _initializing_ them. How about this
trivial one-liner? Does that make it work for you?
Jens? Comments?
Linus
---
===== drivers/scsi/ide-scsi.c 1.33 vs edited =====
--- 1.33/drivers/scsi/ide-scsi.c Tue Nov 18 23:40:45 2003
+++ edited/drivers/scsi/ide-scsi.c Tue Dec 2 10:36:33 2003
@@ -516,6 +516,7 @@
pc->actually_transferred=0; /* We haven't transferred any data yet */
pc->current_position=pc->buffer;
bcount.all = IDE_MIN(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */
+ feature.all = 0;
if (drive->using_dma && rq->bio) {
if (test_bit(PC_WRITING, &pc->flags))
Your fix is correct Linus, the very same bug was fixed in 2.4 recently
as well.
--
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
r***@uk.neceur.com
2003-12-03 12:38:37 UTC
Permalink
Linus,

Cool bananas. I have applied the patch and it has fixed the oops. Many
thanks for the quick reply and patch.

Cheers,

Ross

PS: How about "The Beaver has left the Priory" (or for non UK, "The Beaver
has left the clinic").

---------------------------------------------------------------------------------
Ross Alexander "We demand clearly defined
MIS - NEC Europe Limited boundaries of uncertainty and
Work ph: +44 20 8752 3394 doubt."




Linus Torvalds <***@osdl.org>
02/12/2003 06:37 p.m.

To: ***@uk.neceur.com
cc: Ed Sweetman <***@wmich.edu>, Kernel Mailing List
<linux-***@vger.kernel.org>, Jens Axboe <***@suse.de>
Subject: Re: IDE-SCSI oops in 2.6.0-test11
Post by r***@uk.neceur.com
I can't get the source, otherwise I would have compiled it against
2.6.0. However I don't find this point particularly relevant since
2.6.0 should be backward compatible with 2.4,0, atleast at the binary
level.
I tried the earlier versions of dvdrtools and cdrtools and their didn't
like ide-cd. This version (cdrecord-dvdpro) does but it still don't
alter the fact that while using ide-scsi is no longer recommended, it
still should work.
Well, we're trying, but nobody has had a lot of luck with it.
Post by r***@uk.neceur.com
Here the the oops again.
Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000000
Post by r***@uk.neceur.com
Dec 2 12:02:46 mig27 kernel: 00000000
Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369,
threadinfo=e4160000 task=f65d4100)
Post by r***@uk.neceur.com
Dec 2 12:02:46 mig27 kernel: [<f9859b1b>]
idescsi_transfer_pc+0x11b/0x120 [ide_scsi]

That's the code that does:

...
if (test_bit (PC_DMA_OK, &pc->flags)) {
set_bit (PC_DMA_IN_PROGRESS, &pc->flags);
(void) (HWIF(drive)->ide_dma_begin(drive));
}
...

and it looks like the PC_DMA_OK flag is incorrect.

Doing a bit more digging shows that "idescsi_issue_pc()" seems to use some
variables without ever actually _initializing_ them. How about this
trivial one-liner? Does that make it work for you?

Jens? Comments?

Linus

---
===== drivers/scsi/ide-scsi.c 1.33 vs edited =====
--- 1.33/drivers/scsi/ide-scsi.c Tue Nov 18 23:40:45 2003
+++ edited/drivers/scsi/ide-scsi.c Tue Dec 2 10:36:33 2003
@@ -516,6 +516,7 @@
pc->actually_transferred=0; /* We haven't transferred
any data yet */
pc->current_position=pc->buffer;
bcount.all = IDE_MIN(pc->request_transfer, 63 * 1024);
/* Request to transfer the entire buffer at once */
+ feature.all = 0;

if (drive->using_dma && rq->bio) {
if (test_bit(PC_WRITING, &pc->flags))


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
bill davidsen
2003-12-03 16:19:46 UTC
Permalink
In article <OF5B121C28.378AF7B3-ON80256DF1.004410D0-***@uk.neceur.com>,
<***@uk.neceur.com> wrote:
| Linus,
|
| Cool bananas. I have applied the patch and it has fixed the oops. Many
| thanks for the quick reply and patch.
|
| Cheers,
|
| Ross
|
| PS: How about "The Beaver has left the Priory" (or for non UK, "The Beaver
| has left the clinic").

Oh leave in the Priory, please. Given the overloaded meanings of both
Priory and Beaver in the USA, and the recent scandals with clerical
molestation, it's far funnier that way.
--
bill davidsen <***@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
bill davidsen
2003-12-02 21:51:31 UTC
Permalink
In article <***@wmich.edu>,
Ed Sweetman <***@wmich.edu> wrote:
| ***@uk.neceur.com wrote:
| > CPU: Athlon-XP 2700+
| > MB: ASUS A7N8X Deluxe
| > Memory: 3 x 512MB
| > Notes: UP kernel, standard EIDE driver, boot paramters acpi=off
| > nolapic,noapic
| > Libc: glibc-2.3.2 with linuxthreads.
| >
| > This error occurs while trying to write a DVD+RW to an NEC-1300A DVD
| > writer
| > using cdrecord-dvdpro executable (no source available). This works fine
| > on linux-2.4.23.
| >
|
|
|
| First off, acpi should be working just fine now...should have been for
| the last couple versions of 2.6.0-test.

Is that "should have been working" as in "I believe it to be working" or
"dammit they said it was working?"

| Second, you probably shouldn't be using ide-scsi. ATAPI works just fine
| using straight ide for CDR's so it probably works fine for DVD-R+R+RW
| whatever stupid acronymn they're using today.

ATAPI works fine for programs which know about it and are
Linux-specific. Programs expecting SCSI devices, which work on Linux
2.4, Solaris, SCO, and even Windows (I'm told) want SCSI.

| Third, you didn't post the actual oops so how is anyone supposed t osay
| anything about this problem?

Your mail was truncated, I believe.

| Fourth, you are using a binary you didn't compile that's probably
| compiled against headers for api's found in 2.4.x which is seriously
| different from the kernel you're running it on. Compile your own
| cdrecord and see how it goes.

You missed the "binary only" in his post. That software is no more
available in source than Windows.

I think the real point is not that it doesn't work, but that it oops's
the system. I would regard anything which a user can do which causes an
oops as a critical problem.
--
bill davidsen <***@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Craig Bradney
2003-12-02 21:56:02 UTC
Permalink
Just as an fyi, Im on a 2600, same mobo (well, v2 1007 bios).. 2.6 test
11, acpi on, local apic on, apic on.

Can burn CDs and DVD+RWs without IDE-SCSI just fine.

k3b 0.10.2
cdrdao 1.1.8pre2
cdtools 2.01 alpha 19

Craig
Post by r***@uk.neceur.com
CPU: Athlon-XP 2700+
MB: ASUS A7N8X Deluxe
Memory: 3 x 512MB
Notes: UP kernel, standard EIDE driver, boot paramters acpi=off
nolapic,noapic
Libc: glibc-2.3.2 with linuxthreads.
This error occurs while trying to write a DVD+RW to an NEC-1300A DVD
writer
using cdrecord-dvdpro executable (no source available). This works fine
on linux-2.4.23.
version 3.3.2) #9 Tue Dec 2 09:00:15 GMT 2003
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 0000000000100000 -
000000005fff0000 (usable)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000005fff0000 -
000000005fff3000 (ACPI NVS)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 000000005fff3000 -
0000000060000000 (ACPI data)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Dec 2 11:39:56 mig27 kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Dec 2 11:39:56 mig27 kernel: user: 0000000000000000 - 000000000009fc00
(usable)
Dec 2 11:39:57 mig27 kernel: user: 000000000009fc00 - 00000000000a0000
(reserved)
Dec 2 11:39:57 mig27 kernel: user: 00000000000f0000 - 0000000000100000
(reserved)
Dec 2 11:39:57 mig27 kernel: user: 0000000000100000 - 000000005fff0000
(usable)
Dec 2 11:39:57 mig27 kernel: On node 0 totalpages: 393200
Dec 2 11:39:57 mig27 kernel: DMA zone: 4096 pages, LIFO batch:1
Dec 2 11:39:57 mig27 kernel: Normal zone: 225280 pages, LIFO batch:16
Dec 2 11:39:57 mig27 kernel: HighMem zone: 163824 pages, LIFO batch:16
Dec 2 11:39:57 mig27 kernel: Building zonelist for node : 0
Dec 2 11:39:57 mig27 kernel: Kernel command line: root=/dev/hda1 vga=773
acpi=off nolapic noapic mem=1572800K
32768 bytes)
Dec 2 11:39:57 mig27 kernel: Detected 2162.490 MHz processor.
Dec 2 11:39:57 mig27 kernel: Console: colour dummy device 80x25
Dec 2 11:39:57 mig27 kernel: Calibrating delay loop... 4276.22 BogoMIPS
Dec 2 11:39:57 mig27 kernel: Inode-cache hash table entries: 131072
(order: 7, 524288 bytes)
0, 4096 bytes)
Dec 2 11:39:57 mig27 kernel: CPU: AMD Athlon(tm) XP 2700+ stepping 01
Dec 2 11:39:57 mig27 kernel: POSIX conformance testing by UNIFIX
Dec 2 11:39:57 mig27 kernel: ACPI: ACPI tables contain no PCI IRQ routing
entries
Dec 2 11:39:57 mig27 kernel: PCI: Invalid ACPI-PCI IRQ routing table
Dec 2 11:39:57 mig27 kernel: PCI: Probing PCI hardware
Dec 2 11:39:57 mig27 kernel: PCI: Probing PCI hardware (bus 00)
Dec 2 11:39:57 mig27 kernel: highmem bounce pool size: 64 pages
Dec 2 11:39:57 mig27 kernel: Console: switching to colour frame buffer
device 128x48
Dec 2 11:39:57 mig27 kernel: pty: 256 Unix98 ptys configured
Dec 2 11:39:57 mig27 kernel: hda: ST380021A, ATA DISK drive
Dec 2 11:39:57 mig27 kernel: hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM
drive
Dec 2 11:39:57 mig27 kernel: hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM
drive
Dec 2 11:39:57 mig27 kernel: Using anticipatory io scheduler
Dec 2 11:39:57 mig27 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 2 11:39:57 mig27 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 2 11:39:57 mig27 kernel: hda: max request size: 128KiB
Dec 2 11:39:57 mig27 kernel: Console: switching to colour frame buffer
device 128x48
Dec 2 11:39:57 mig27 kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Dec 2 11:39:57 mig27 kernel: 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
Dec 2 11:40:28 mig27 kernel: mtrr: 0xd0000000,0x4000000 overlaps existing
0xd0000000,0x1000000
Dec 2 11:40:33 mig27 kernel: spurious 8259A interrupt: IRQ7.
Dec 2 11:42:56 mig27 kernel: hdc: ATAPI 52X CD-ROM drive, 128kB Cache
Dec 2 11:42:56 mig27 kernel: hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive,
2048kB Cache
Dec 2 11:51:36 mig27 kernel: ide-scsi is deprecated for cd burning! Use
ide-cd and give dev=/dev/hdX as device
Dec 2 11:51:43 mig27 kernel: ahc_pci:1:10:0: Host Adapter Bios disabled.
Using default SCSI device parameters
Dec 2 11:51:43 mig27 kernel: <Adaptec 2902/04/10/15/20/30C SCSI
adapter>
Dec 2 11:51:43 mig27 kernel: aic7850: Single Channel A, SCSI
Id=7, 3/253 SCBs
Dec 2 11:51:58 mig27 kernel: (scsi2:A:1): 10.000MB/s transfers
(10.000MHz, offset 15)
Dec 2 11:53:20 mig27 kernel: sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2
cdda tray
Dec 2 11:53:20 mig27 kernel: sr1: scsi3-mmc drive: 40x/40x writer cd/rw
xa/form2 cdda tray
Dec 2 11:53:20 mig27 kernel: sr2: scsi3-mmc drive: 16x/40x cd/rw xa/form2
cdda tray
Dec 2 12:02:46 mig27 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000000
Dec 2 12:02:46 mig27 kernel: 00000000
Dec 2 12:02:46 mig27 kernel: *pde = 00000000
Dec 2 12:02:46 mig27 kernel: Oops: 0000 [#1]
Dec 2 12:02:46 mig27 kernel: CPU: 0
Dec 2 12:02:46 mig27 kernel: EIP: 0060:[<00000000>] Not tainted
Dec 2 12:02:46 mig27 kernel: EFLAGS: 00210202
Dec 2 12:02:46 mig27 kernel: EIP is at 0x0
00000000 edx: 00000170
e4161be0 esp: e4161bb8
Dec 2 12:02:46 mig27 kernel: ds: 007b es: 007b ss: 0068
Dec 2 12:02:46 mig27 kernel: Process cdrecord-prodvd (pid: 369,
threadinfo=e4160000 task=f65d4100)
Dec 2 12:02:46 mig27 kernel: Stack: f9859b1b c035516c f623e400 0000000c
00000000 0000001e f6ed4fc0 c035516c
Dec 2 12:02:46 mig27 kernel: 00000000 f6f9b240 e4161c0c c01ff25a
c035516c f623e400 00000000 00000000
Dec 2 12:02:46 mig27 kernel: 0000001e 0000000f f6f9b240 c035516c
c0354f10 e4161c38 c01ff570 c035516c
Dec 2 12:02:46 mig27 kernel: [<f9859b1b>]
idescsi_transfer_pc+0x11b/0x120 [ide_scsi]
Dec 2 12:02:46 mig27 kernel: [<c01ff25a>] start_request+0x16a/0x270
Dec 2 12:02:46 mig27 kernel: [<c01ff570>] ide_do_request+0x1e0/0x360
Dec 2 12:02:46 mig27 kernel: [<c01f3587>] __elv_add_request+0x27/0x40
Dec 2 12:02:46 mig27 kernel: [<c01ffd5e>] ide_do_drive_cmd+0xce/0x170
Dec 2 12:02:46 mig27 kernel: [<f985a36b>] idescsi_queue+0x1fb/0x630
[ide_scsi]
Dec 2 12:02:46 mig27 kernel: [<f993171f>]
scsi_init_cmd_from_req+0xcf/0x150 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f993159e>] scsi_dispatch_cmd+0x14e/0x200
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f99317a0>] scsi_done+0x0/0x70 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f9933ae0>] scsi_times_out+0x0/0x50
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f993631d>] scsi_request_fn+0x1cd/0x320
[scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<c01f5b0c>] blk_insert_request+0x7c/0xd0
Dec 2 12:02:46 mig27 kernel: [<f9934ffb>]
scsi_insert_special_req+0x3b/0x40 [scsi_mod]
Dec 2 12:02:46 mig27 kernel: [<f98c3eb1>] sg_common_write+0x161/0x1d0
[sg]
Dec 2 12:02:46 mig27 kernel: [<f98c5290>] sg_cmd_done+0x0/0x280 [sg]
Dec 2 12:02:46 mig27 kernel: [<f98c3c73>] sg_new_write+0x1c3/0x2a0 [sg]
Dec 2 12:02:46 mig27 kernel: [<f98c4c09>] sg_ioctl+0xce9/0xf20 [sg]
Dec 2 12:02:46 mig27 kernel: [<c0204812>] pre_task_mulout_intr+0x82/0x90
Dec 2 12:02:46 mig27 kernel: [<c01afee4>] __delay+0x14/0x20
Dec 2 12:02:46 mig27 kernel: [<c02037fe>] do_rw_taskfile+0x12e/0x2b0
Dec 2 12:02:46 mig27 kernel: [<c01faff3>]
as_remove_queued_request+0x83/0x120
Dec 2 12:02:46 mig27 kernel: [<c020a194>] lba_28_rw_disk+0xa4/0xb0
Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
Dec 2 12:02:46 mig27 kernel: [<c01284b6>] update_process_times+0x46/0x50
Dec 2 12:02:46 mig27 kernel: [<c012832d>] update_wall_time+0xd/0x40
Dec 2 12:02:46 mig27 kernel: [<c012877e>] do_timer+0xde/0xf0
Dec 2 12:02:46 mig27 kernel: [<c011cbf0>] default_wake_function+0x0/0x20
Dec 2 12:02:46 mig27 kernel: [<c01103ea>] do_gettimeofday+0x2a/0xc0
Dec 2 12:02:46 mig27 kernel: [<c01666d4>] sys_ioctl+0xf4/0x2a0
Dec 2 12:02:46 mig27 kernel: [<c010a36f>] syscall_call+0x7/0xb
Dec 2 12:02:46 mig27 kernel: Code: Bad EIP value.
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCS _QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_IOCTL_V4=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C bit-banging
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
---------------------------------------------------------------------------------
Ross Alexander "We demand clearly defined
MIS - NEC Europe Limited boundaries of uncertainty and
Work ph: +44 20 8752 3394 doubt."
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
bill davidsen
2003-12-03 03:05:51 UTC
Permalink
In article <***@athlonxp.bradney.info>,
Craig Bradney <***@zip.com.au> wrote:
| Just as an fyi, Im on a 2600, same mobo (well, v2 1007 bios).. 2.6 test
| 11, acpi on, local apic on, apic on.
|
| Can burn CDs and DVD+RWs without IDE-SCSI just fine.

I bet you're using a recent cdrecord and growisofs, both of which have
had Linux-specific code added to use the non-SCSI interface. Programs
which are written for SCSI won't run on that interface.

I'm told that SCSI programs for Win9x will run under vmware using
ide-scsi under 2.4 but not 2.6, can someone confirm? I don't have the
software for that test, but I'm told Win9x is quite popular ;-)

The last time I tried cdparanoia it didn't work with 2.6 (ATAPI or
ide-scsi), and I haven't tried cdda2wav. Some work, some don't.

Please let us know if you're using other software than my guess, hard to
track what's been converted from SCSI to ATAPI.
--
bill davidsen <***@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
bill davidsen
2003-12-03 03:04:28 UTC
Permalink
In article <***@athlonxp.bradney.info>,
Craig Bradney <***@zip.com.au> wrote:
| On Wed, 2003-12-03 at 00:10, bill davidsen wrote:
| > In article <***@athlonxp.bradney.info>,
| > Craig Bradney <***@zip.com.au> wrote:
| > | Just as an fyi, Im on a 2600, same mobo (well, v2 1007 bios).. 2.6 test
| > | 11, acpi on, local apic on, apic on.
| > |
| > | Can burn CDs and DVD+RWs without IDE-SCSI just fine.
| >
| > I bet you're using a recent cdrecord and growisofs, both of which have
| > had Linux-specific code added to use the non-SCSI interface. Programs
| > which are written for SCSI won't run on that interface.

At this point I'll sat thanks for all the version numbers, and ask if
you have noted if the DVD burn is using DMA or not. If your system CPU
is very low it clearly is. I haven't checked to see if an audio burn
uses DMA, data CD burn clearly does. That one I can check this weekend,
my 2.6 boxen here have no burners.

| Sorry.. missed those out:
| k3b 0.10.2
| cdrdao 1.1.8pre2
| cdrtools 2.01 alpha 19 (cdrecord is in here.. it is 2.01a19-dvd)
| and growisofs is 5.1.3
| mkisofs is 2.01a17.
|
| All are latest "usntable" builds on Gentoo, or cvs. So, yes.. very
| recent. I was very happy when i could burn a CD/DVD without IDE-SCSI,
| and that was part of the reason I tried out 2.6 now.
|
| > I'm told that SCSI programs for Win9x will run under vmware using
| > ide-scsi under 2.4 but not 2.6, can someone confirm? I don't have the
| > software for that test, but I'm told Win9x is quite popular ;-)
|
| >
| > The last time I tried cdparanoia it didn't work with 2.6 (ATAPI or
| > ide-scsi), and I haven't tried cdda2wav. Some work, some don't.
|
| cdparanoia: 9.8 (march 23 2001)
| cdda2wav 2.01a19
| >
| > Please let us know if you're using other software than my guess, hard to
| > track what's been converted from SCSI to ATAPI.
|
| Let me know if you want anymore versions.
|
| Craig
|
| -
| To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
| the body of a message to ***@vger.kernel.org
| More majordomo info at http://vger.kernel.org/majordomo-info.html
| Please read the FAQ at http://www.tux.org/lkml/
|
--
bill davidsen <***@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Craig Bradney
2003-12-03 03:11:30 UTC
Permalink
Post by bill davidsen
| Just as an fyi, Im on a 2600, same mobo (well, v2 1007 bios).. 2.6 test
| 11, acpi on, local apic on, apic on.
|
| Can burn CDs and DVD+RWs without IDE-SCSI just fine.
I bet you're using a recent cdrecord and growisofs, both of which have
had Linux-specific code added to use the non-SCSI interface. Programs
which are written for SCSI won't run on that interface.
Sorry.. missed those out:
k3b 0.10.2
cdrdao 1.1.8pre2
cdrtools 2.01 alpha 19 (cdrecord is in here.. it is 2.01a19-dvd)
and growisofs is 5.1.3
mkisofs is 2.01a17.

All are latest "usntable" builds on Gentoo, or cvs. So, yes.. very
recent. I was very happy when i could burn a CD/DVD without IDE-SCSI,
and that was part of the reason I tried out 2.6 now.
Post by bill davidsen
I'm told that SCSI programs for Win9x will run under vmware using
ide-scsi under 2.4 but not 2.6, can someone confirm? I don't have the
software for that test, but I'm told Win9x is quite popular ;-)
The last time I tried cdparanoia it didn't work with 2.6 (ATAPI or
ide-scsi), and I haven't tried cdda2wav. Some work, some don't.
cdparanoia: 9.8 (march 23 2001)
cdda2wav 2.01a19
Post by bill davidsen
Please let us know if you're using other software than my guess, hard to
track what's been converted from SCSI to ATAPI.
Let me know if you want anymore versions.

Craig

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Loading...