Discussion:
[PATCH 4.7 00/31] 4.7.8-stable review
(too old to reply)
Greg Kroah-Hartman
2016-10-14 12:55:30 UTC
Permalink
This is the start of the stable review cycle for the 4.7.8 release.
There are 31 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Oct 16 12:27:05 UTC 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.7.8-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.7.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <***@linuxfoundation.org>
Linux 4.7.8-rc1

Jarkko Sakkinen <***@linux.intel.com>
tpm_crb: fix crb_req_canceled behavior

Jarkko Sakkinen <***@linux.intel.com>
tpm: fix a race condition in tpm2_unseal_trusted()

Miklos Szeredi <***@redhat.com>
ima: use file_dentry()

Christophe Jaillet <***@wanadoo.fr>
ARM: cpuidle: Fix error return code

Linus Walleij <***@linaro.org>
ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs

Grzegorz Jaszczyk <***@semihalf.com>
ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

Josh Poimboeuf <***@redhat.com>
x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access

Nicolas Iooss <***@m4x.org>
x86/mm/pkeys: Do not skip PKRU register if debug registers are not used

Prarit Bhargava <***@redhat.com>
arch/x86: Handle non enumerated CPU after physical hotplug

Denys Vlasenko <***@redhat.com>
x86/apic: Get rid of apic_version[] array

Dave Hansen <***@intel.com>
x86/pkeys: Make protection keys an "eager" feature

Mika Westerberg <***@linux.intel.com>
x86/irq: Prevent force migration of irqs which are not in the vector domain

Dan Williams <***@intel.com>
x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation

Mark Rutland <***@arm.com>
arm64: fix dump_backtrace/unwind_frame with NULL tsk

Dan Carpenter <***@oracle.com>
KVM: PPC: BookE: Fix a sanity check

Christoffer Dall <***@linaro.org>
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic

Christoffer Dall <***@linaro.org>
KVM: arm64: Require in-kernel irqchip for PMU support

James Hogan <***@imgtec.com>
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes

Thomas Huth <***@redhat.com>
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register

Boris Ostrovsky <***@oracle.com>
xen/x86: Update topology map for PV VCPUs

Uwe Kleine-König <u.kleine-***@pengutronix.de>
mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

Dan Carpenter <***@oracle.com>
mfd: 88pm80x: Double shifting bug in suspend/resume

Boris Brezillon <***@free-electrons.com>
mfd: atmel-hlcdc: Do not sleep in atomic context

Lu Baolu <***@linux.intel.com>
mfd: rtsx_usb: Avoid setting ucr->current_sg.status

Takashi Sakamoto <o-***@sakamocchi.jp>
ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID

Anssi Hannula <***@iki.fi>
ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

Takashi Iwai <***@suse.de>
ALSA: ali5451: Fix out-of-bound position reporting

Lu Baolu <***@linux.intel.com>
usb: dwc3: fix Clear Stall EP command failure

John Stultz <***@linaro.org>
timekeeping: Fix __ktime_get_fast_ns() regression

Andrew Donnellan <***@au1.ibm.com>
cxl: use pcibios_free_controller_deferred() when removing vPHBs

Mauricio Faria de Oliveira <***@linux.vnet.ibm.com>
powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)


-------------

Diffstat:

Documentation/virtual/kvm/devices/vcpu.txt | 4 +-
Makefile | 4 +-
arch/arm/boot/dts/armada-390.dtsi | 3 +
arch/arm/boot/dts/qcom-apq8064.dtsi | 76 ++++++++++++++++------
arch/arm64/kernel/stacktrace.c | 5 +-
arch/arm64/kernel/traps.c | 10 +--
arch/mips/kvm/emulate.c | 63 +++++++++++++++---
arch/powerpc/include/asm/pci-bridge.h | 1 +
arch/powerpc/include/asm/reg.h | 1 +
arch/powerpc/kernel/pci-common.c | 36 ++++++++++
arch/powerpc/kvm/book3s_emulate.c | 2 +
arch/powerpc/kvm/booke.c | 2 +-
arch/powerpc/platforms/pseries/pci.c | 4 ++
arch/powerpc/platforms/pseries/pci_dlpar.c | 7 +-
arch/x86/include/asm/fpu/xstate.h | 7 +-
arch/x86/include/asm/mpspec.h | 2 +-
arch/x86/kernel/acpi/boot.c | 2 +-
arch/x86/kernel/apic/apic.c | 17 ++---
arch/x86/kernel/apic/io_apic.c | 4 +-
arch/x86/kernel/apic/probe_32.c | 2 +-
arch/x86/kernel/apic/vector.c | 23 ++++++-
arch/x86/kernel/e820.c | 14 ++--
arch/x86/kernel/process_64.c | 13 ++--
arch/x86/kernel/ptrace.c | 4 +-
arch/x86/kernel/smpboot.c | 28 +++++---
arch/x86/xen/smp.c | 6 ++
drivers/char/tpm/tpm-dev.c | 2 +-
drivers/char/tpm/tpm-interface.c | 51 ++++++++-------
drivers/char/tpm/tpm-sysfs.c | 2 +-
drivers/char/tpm/tpm.h | 12 ++--
drivers/char/tpm/tpm2-cmd.c | 101 +++++++++++++++++++----------
drivers/char/tpm/tpm_crb.c | 7 +-
drivers/cpuidle/cpuidle-arm.c | 1 +
drivers/mfd/Kconfig | 1 +
drivers/mfd/atmel-hlcdc.c | 5 +-
drivers/mfd/rtsx_usb.c | 10 +--
drivers/misc/cxl/vphb.c | 10 ++-
drivers/pci/host-bridge.c | 1 +
drivers/usb/dwc3/gadget.c | 3 +-
include/linux/mfd/88pm80x.h | 4 +-
kernel/time/timekeeping.c | 7 +-
security/integrity/ima/ima_appraise.c | 4 +-
security/integrity/ima/ima_main.c | 2 +-
sound/pci/ali5451/ali5451.c | 2 +
sound/usb/line6/driver.c | 2 +-
sound/usb/mixer_quirks.c | 22 +++++--
virt/kvm/arm/pmu.c | 8 +++
virt/kvm/arm/vgic/vgic.c | 6 ++
48 files changed, 426 insertions(+), 177 deletions(-)
Greg Kroah-Hartman
2016-10-14 12:55:31 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mauricio Faria de Oliveira <***@linux.vnet.ibm.com>

commit 2dd9c11b9d4dfbd6c070eab7b81197f65e82f1a0 upstream.

This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).

The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped). Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).

It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.

The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.

The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).

Details on not-so-elegant design choices:

- Use 'pci_host_bridge.release_data' field as pointer to associated
'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)'
in pcibios_free_controller_deferred().

That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL'
(so, if the last reference is released after pci_remove_root_bus()
runs, which eventually reaches pcibios_free_controller_deferred(),
that would hit a null pointer dereference).

The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
are interested in this fix.

Test-case #1 (hold references)

# ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
<...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...>

# ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
<...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...>

# cat >/dev/sdaa & pid1=$!
# cat >/dev/sdab & pid2=$!

# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 594.306738] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 598.236381] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 611.972140] rpadlpar_io: slot PHB 33 removed

# kill -9 $pid1
# kill -9 $pid2
[ 632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1

Test-case #2 (don't hold references)

# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 916.357386] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 920.566527] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
[ 933.955999] rpadlpar_io: slot PHB 33 removed

Suggested-By: Gavin Shan <***@linux.vnet.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <***@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <***@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <***@au1.ibm.com>
Tested-by: Andrew Donnellan <***@au1.ibm.com> # cxl
Signed-off-by: Benjamin Herrenschmidt <***@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/powerpc/include/asm/pci-bridge.h | 1
arch/powerpc/kernel/pci-common.c | 36 +++++++++++++++++++++++++++++
arch/powerpc/platforms/pseries/pci.c | 4 +++
arch/powerpc/platforms/pseries/pci_dlpar.c | 7 ++++-
4 files changed, 46 insertions(+), 2 deletions(-)

--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -299,6 +299,7 @@ extern void pci_process_bridge_OF_ranges
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_free_controller_deferred(struct pci_host_bridge *bridge);

#ifdef CONFIG_PCI
extern int pcibios_vaddr_is_ioport(void __iomem *address);
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -103,6 +103,42 @@ void pcibios_free_controller(struct pci_
EXPORT_SYMBOL_GPL(pcibios_free_controller);

/*
+ * This function is used to call pcibios_free_controller()
+ * in a deferred manner: a callback from the PCI subsystem.
+ *
+ * _*DO NOT*_ call pcibios_free_controller() explicitly if
+ * this is used (or it may access an invalid *phb pointer).
+ *
+ * The callback occurs when all references to the root bus
+ * are dropped (e.g., child buses/devices and their users).
+ *
+ * It's called as .release_fn() of 'struct pci_host_bridge'
+ * which is associated with the 'struct pci_controller.bus'
+ * (root bus) - it expects .release_data to hold a pointer
+ * to 'struct pci_controller'.
+ *
+ * In order to use it, register .release_fn()/release_data
+ * like this:
+ *
+ * pci_set_host_bridge_release(bridge,
+ * pcibios_free_controller_deferred
+ * (void *) phb);
+ *
+ * e.g. in the pcibios_root_bridge_prepare() callback from
+ * pci_create_root_bus().
+ */
+void pcibios_free_controller_deferred(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *phb = (struct pci_controller *)
+ bridge->release_data;
+
+ pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic);
+
+ pcibios_free_controller(phb);
+}
+EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred);
+
+/*
* The function is used to return the minimal alignment
* for memory or I/O windows of the associated P2P bridge.
* By default, 4KiB alignment for I/O windows and 1MiB for
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -119,6 +119,10 @@ int pseries_root_bridge_prepare(struct p

bus = bridge->bus;

+ /* Rely on the pcibios_free_controller_deferred() callback. */
+ pci_set_host_bridge_release(bridge, pcibios_free_controller_deferred,
+ (void *) pci_bus_to_host(bus));
+
dn = pcibios_get_phb_of_node(bus);
if (!dn)
return 0;
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -106,8 +106,11 @@ int remove_phb_dynamic(struct pci_contro
release_resource(res);
}

- /* Free pci_controller data structure */
- pcibios_free_controller(phb);
+ /*
+ * The pci_controller data structure is freed by
+ * the pcibios_free_controller_deferred() callback;
+ * see pseries_root_bridge_prepare().
+ */

return 0;
}
Greg Kroah-Hartman
2016-10-14 12:55:34 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Ostrovsky <***@oracle.com>

commit a6a198bc60e6c980a56eca24d33dc7f29139f8ea upstream.

Early during boot topology_update_package_map() computes
logical_pkg_ids for all present processors.

Later, when processors are brought up, identify_cpu() updates
these values based on phys_pkg_id which is a function of
initial_apicid. On PV guests the latter may point to a
non-existing node, causing logical_pkg_ids to be set to -1.

Intel's RAPL uses logical_pkg_id (as topology_logical_package_id())
to index its arrays and therefore in this case will point to index
65535 (since logical_pkg_id is a u16). This could lead to either a
crash or may actually access random memory location.

As a workaround, we recompute topology during CPU bringup to reset
logical_pkg_id to a valid value.

(The reason for initial_apicid being bogus is because it is
initial_apicid of the processor from which the guest is launched.
This value is CPUID(1).EBX[31:24])

Signed-off-by: Boris Ostrovsky <***@oracle.com>
Signed-off-by: David Vrabel <***@citrix.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/xen/smp.c | 6 ++++++
1 file changed, 6 insertions(+)

--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -87,6 +87,12 @@ static void cpu_bringup(void)
cpu_data(cpu).x86_max_cores = 1;
set_cpu_sibling_map(cpu);

+ /*
+ * identify_cpu() may have set logical_pkg_id to -1 due
+ * to incorrect phys_proc_id. Let's re-comupte it.
+ */
+ topology_update_package_map(apic->cpu_present_to_apicid(cpu), cpu);
+
xen_setup_cpu_clockevents();

notify_cpu_starting(cpu);
Greg Kroah-Hartman
2016-10-14 12:55:49 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Huth <***@redhat.com>

commit fa73c3b25bd8d0d393dc6109a1dba3c2aef0451e upstream.

The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb571f3c92c ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes: 8dd75ccb571f3c92c48014b3dabd3d51a115ab41
Signed-off-by: Thomas Huth <***@redhat.com>
Signed-off-by: Paul Mackerras <***@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/powerpc/include/asm/reg.h | 1 +
arch/powerpc/kvm/book3s_emulate.c | 2 ++
2 files changed, 3 insertions(+)

--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -718,6 +718,7 @@
#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
#define SPRN_MMCR1 798
#define SPRN_MMCR2 785
+#define SPRN_UMMCR2 769
#define SPRN_MMCRA 0x312
#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */
#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -498,6 +498,7 @@ int kvmppc_core_emulate_mtspr_pr(struct
case SPRN_MMCR0:
case SPRN_MMCR1:
case SPRN_MMCR2:
+ case SPRN_UMMCR2:
#endif
break;
unprivileged:
@@ -640,6 +641,7 @@ int kvmppc_core_emulate_mfspr_pr(struct
case SPRN_MMCR0:
case SPRN_MMCR1:
case SPRN_MMCR2:
+ case SPRN_UMMCR2:
case SPRN_TIR:
#endif
*spr_val = 0;
Greg Kroah-Hartman
2016-10-14 12:56:04 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Donnellan <***@au1.ibm.com>

commit 6f38a8b9a45833495dc878c335c5431cd98a16ed upstream.

When cxl removes a vPHB, it's possible that the pci_controller may be freed
before all references to the devices on the vPHB have been released. This
in turn causes an invalid memory access when the devices are eventually
released, as pcibios_release_device() attempts to call the phb's
release_device hook.

In cxl_pci_vphb_remove(), remove the existing call to
pcibios_free_controller(). Instead, use
pcibios_free_controller_deferred() to free the pci_controller after all
devices have been released. Export pci_set_host_bridge_release() so we can
do this.

Signed-off-by: Andrew Donnellan <***@au1.ibm.com>
Reviewed-by: Matthew R. Ochs <***@linux.vnet.ibm.com>
Acked-by: Ian Munsie <***@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <***@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/misc/cxl/vphb.c | 10 +++++++++-
drivers/pci/host-bridge.c | 1 +
2 files changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -243,6 +243,11 @@ int cxl_pci_vphb_add(struct cxl_afu *afu
if (phb->bus == NULL)
return -ENXIO;

+ /* Set release hook on root bus */
+ pci_set_host_bridge_release(to_pci_host_bridge(phb->bus->bridge),
+ pcibios_free_controller_deferred,
+ (void *) phb);
+
/* Claim resources. This might need some rework as well depending
* whether we are doing probe-only or not, like assigning unassigned
* resources etc...
@@ -269,7 +274,10 @@ void cxl_pci_vphb_remove(struct cxl_afu
afu->phb = NULL;

pci_remove_root_bus(phb->bus);
- pcibios_free_controller(phb);
+ /*
+ * We don't free phb here - that's handled by
+ * pcibios_free_controller_deferred()
+ */
}

bool cxl_pci_is_vphb_device(struct pci_dev *dev)
--- a/drivers/pci/host-bridge.c
+++ b/drivers/pci/host-bridge.c
@@ -44,6 +44,7 @@ void pci_set_host_bridge_release(struct
bridge->release_fn = release_fn;
bridge->release_data = release_data;
}
+EXPORT_SYMBOL_GPL(pci_set_host_bridge_release);

void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region,
struct resource *res)
Greg Kroah-Hartman
2016-10-14 12:56:06 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Stultz <***@linaro.org>

commit 58bfea9532552d422bde7afa207e1a0f08dffa7d upstream.

In commit 27727df240c7 ("Avoid taking lock in NMI path with
CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code
the timekeeping_get_ns() function, but I forgot to include
the unit conversion from cycles to nanoseconds, breaking the
function's output, which impacts users like perf.

This results in bogus perf timestamps like:
swapper 0 [000] 253.427536: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.426573: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.426687: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.426800: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.426905: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.427022: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.427127: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.427239: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.427346: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 254.427463: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 255.426572: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Instead of more reasonable expected timestamps like:
swapper 0 [000] 39.953768: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.064839: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.175956: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.287103: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.398217: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.509324: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.620437: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.731546: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.842654: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 40.953772: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
swapper 0 [000] 41.064881: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Add the proper use of timekeeping_delta_to_ns() to convert
the cycle delta to nanoseconds as needed.

Thanks to Brendan and Alexei for finding this quickly after
the v4.8 release. Unfortunately the problematic commit has
landed in some -stable trees so they'll need this fix as
well.

Many apologies for this mistake. I'll be looking to add a
perf-clock sanity test to the kselftest timers tests soon.

Fixes: 27727df240c7 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"
Reported-by: Brendan Gregg <***@netflix.com>
Reported-by: Alexei Starovoitov <***@gmail.com>
Tested-and-reviewed-by: Mathieu Desnoyers <***@efficios.com>
Signed-off-by: John Stultz <***@linaro.org>
Cc: Peter Zijlstra <***@infradead.org>
Cc: Steven Rostedt <***@goodmis.org>
Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-***@linaro.org
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Cc: Mathieu Desnoyers <***@efficios.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
kernel/time/timekeeping.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -403,8 +403,11 @@ static __always_inline u64 __ktime_get_f
tkr = tkf->base + (seq & 0x01);
now = ktime_to_ns(tkr->base);

- now += clocksource_delta(tkr->read(tkr->clock),
- tkr->cycle_last, tkr->mask);
+ now += timekeeping_delta_to_ns(tkr,
+ clocksource_delta(
+ tkr->read(tkr->clock),
+ tkr->cycle_last,
+ tkr->mask));
} while (read_seqcount_retry(&tkf->seq, seq));

return now;
Greg Kroah-Hartman
2016-10-14 12:56:20 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lu Baolu <***@linux.intel.com>

commit 5e6c88d28ccbe72bedee1fbf4f9fea4764208598 upstream.

Commit 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear
Stall EP command") sets ClearPendIN bit for all IN endpoints of
v2.60a+ cores. This causes ClearStall command fails on 2.60+ cores
operating in HighSpeed mode.

In page 539 of 2.60a specification:

"When issuing Clear Stall command for IN endpoints in SuperSpeed
mode, the software must set the "ClearPendIN" bit to '1' to
clear any pending IN transcations, so that the device does not
expect any ACK TP from the host for the data sent earlier."

It's obvious that we only need to apply this rule to those IN
endpoints that currently operating in SuperSpeed mode.

Fixes: 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command")
Signed-off-by: Lu Baolu <***@linux.intel.com>
Signed-off-by: Felipe Balbi <***@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/usb/dwc3/gadget.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -363,7 +363,8 @@ static int dwc3_send_clear_stall_ep_cmd(
* IN transfers due to a mishandled error condition. Synopsys
* STAR 9000614252.
*/
- if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
+ if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) &&
+ (dwc->gadget.speed >= USB_SPEED_SUPER))
cmd |= DWC3_DEPCMD_CLEARPENDIN;

memset(&params, 0, sizeof(params));
Greg Kroah-Hartman
2016-10-14 12:56:36 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <***@iki.fi>

commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream.

The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.

Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: Anssi Hannula <***@iki.fi>
Reported-by: David W <***@d-dub.org.uk>
Tested-by: David W <***@d-dub.org.uk>
Signed-off-by: Takashi Iwai <***@suse.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
sound/usb/mixer_quirks.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)

--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1831,6 +1831,7 @@ void snd_usb_mixer_rc_memory_change(stru
}

static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+ struct usb_mixer_elem_info *cval,
struct snd_kcontrol *kctl)
{
/* Approximation using 10 ranges based on output measurement on hw v1.2.
@@ -1848,10 +1849,19 @@ static void snd_dragonfly_quirk_db_scale
41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
);

- usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n");
- kctl->tlv.p = scale;
- kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
- kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+ if (cval->min == 0 && cval->max == 50) {
+ usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk (0-50 variant)\n");
+ kctl->tlv.p = scale;
+ kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+ kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+
+ } else if (cval->min == 0 && cval->max <= 1000) {
+ /* Some other clearly broken DragonFly variant.
+ * At least a 0..53 variant (hw v1.0) exists.
+ */
+ usb_audio_info(mixer->chip, "ignoring too narrow dB range on a DragonFly device");
+ kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+ }
}

void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
@@ -1860,8 +1870,8 @@ void snd_usb_mixer_fu_apply_quirk(struct
{
switch (mixer->chip->usb_id) {
case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
- if (unitid == 7 && cval->min == 0 && cval->max == 50)
- snd_dragonfly_quirk_db_scale(mixer, kctl);
+ if (unitid == 7 && cval->control == UAC_FU_VOLUME)
+ snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
break;
}
}
Greg Kroah-Hartman
2016-10-14 12:56:52 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lu Baolu <***@linux.intel.com>

commit 8dcc5ff8fcaf778bb57ab4448fedca9e381d088f upstream.

Member "status" of struct usb_sg_request is managed by usb core. A
spin lock is used to serialize the change of it. The driver could
check the value of req->status, but should avoid changing it without
the hold of the spinlock. Otherwise, it could cause race or error
in usb core.

This patch could be backported to stable kernels with version later
than v3.14.

Cc: Alan Stern <***@rowland.harvard.edu>
Cc: Roger Tseng <***@realtek.com>
Signed-off-by: Lu Baolu <***@linux.intel.com>
Signed-off-by: Lee Jones <***@linaro.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/mfd/rtsx_usb.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -46,9 +46,6 @@ static void rtsx_usb_sg_timed_out(unsign

dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__);
usb_sg_cancel(&ucr->current_sg);
-
- /* we know the cancellation is caused by time-out */
- ucr->current_sg.status = -ETIMEDOUT;
}

static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
@@ -67,12 +64,15 @@ static int rtsx_usb_bulk_transfer_sglist
ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
add_timer(&ucr->sg_timer);
usb_sg_wait(&ucr->current_sg);
- del_timer_sync(&ucr->sg_timer);
+ if (!del_timer_sync(&ucr->sg_timer))
+ ret = -ETIMEDOUT;
+ else
+ ret = ucr->current_sg.status;

if (act_len)
*act_len = ucr->current_sg.bytes;

- return ucr->current_sg.status;
+ return ret;
}

int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
Greg Kroah-Hartman
2016-10-14 12:57:04 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <***@redhat.com>

commit 72b4f6a5e903b071f2a7c4eb1418cbe4eefdc344 upstream.

On x86_32, when an interrupt happens from kernel space, SS and SP aren't
pushed and the existing stack is used. So pt_regs is effectively two
words shorter, and the previous stack pointer is normally the memory
after the shortened pt_regs, aka '&regs->sp'.

But in the rare case where the interrupt hits right after the stack
pointer has been changed to point to an empty stack, like for example
when call_on_stack() is used, the address immediately after the
shortened pt_regs is no longer on the stack. In that case, instead of
'&regs->sp', the previous stack pointer should be retrieved from the
beginning of the current stack page.

kernel_stack_pointer() wants to do that, but it forgets to dereference
the pointer. So instead of returning a pointer to the previous stack,
it returns a pointer to the beginning of the current stack.

Note that it's probably outside of kernel_stack_pointer()'s scope to be
switching stacks at all. The x86_64 version of this function doesn't do
it, and it would be better for the caller to do it if necessary. But
that's a patch for another day. This just fixes the original intent.

Signed-off-by: Josh Poimboeuf <***@redhat.com>
Cc: Andy Lutomirski <***@amacapital.net>
Cc: Andy Lutomirski <***@kernel.org>
Cc: Borislav Petkov <***@alien8.de>
Cc: Brian Gerst <***@gmail.com>
Cc: Byungchul Park <***@lge.com>
Cc: Denys Vlasenko <***@redhat.com>
Cc: Frederic Weisbecker <***@gmail.com>
Cc: H. Peter Anvin <***@zytor.com>
Cc: Kees Cook <***@chromium.org>
Cc: Linus Torvalds <***@linux-foundation.org>
Cc: Nilay Vaish <***@gmail.com>
Cc: Peter Zijlstra <***@infradead.org>
Cc: Steven Rostedt <***@goodmis.org>
Cc: Thomas Gleixner <***@linutronix.de>
Fixes: 0788aa6a23cb ("x86: Prepare removal of previous_esp from i386 thread_info structure")
Link: http://lkml.kernel.org/r/***@redhat.com
Signed-off-by: Ingo Molnar <***@kernel.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/kernel/ptrace.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -173,8 +173,8 @@ unsigned long kernel_stack_pointer(struc
return sp;

prev_esp = (u32 *)(context);
- if (prev_esp)
- return (unsigned long)prev_esp;
+ if (*prev_esp)
+ return (unsigned long)*prev_esp;

return (unsigned long)regs;
}
Greg Kroah-Hartman
2016-10-14 12:57:13 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <***@redhat.com>

commit e71b9dff0634edb127f449e076e883ef24a8c76c upstream.

Ima tries to call ->setxattr() on overlayfs dentry after having locked
underlying inode, which results in a deadlock.

Reported-by: Krisztian Litkey <***@iki.fi>
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <***@redhat.com>
Cc: Mimi Zohar <***@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
security/integrity/ima/ima_appraise.c | 4 ++--
security/integrity/ima/ima_main.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)

--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -190,7 +190,7 @@ int ima_appraise_measurement(enum ima_ho
{
static const char op[] = "appraise_data";
char *cause = "unknown";
- struct dentry *dentry = file->f_path.dentry;
+ struct dentry *dentry = file_dentry(file);
struct inode *inode = d_backing_inode(dentry);
enum integrity_status status = INTEGRITY_UNKNOWN;
int rc = xattr_len, hash_start = 0;
@@ -295,7 +295,7 @@ out:
*/
void ima_update_xattr(struct integrity_iint_cache *iint, struct file *file)
{
- struct dentry *dentry = file->f_path.dentry;
+ struct dentry *dentry = file_dentry(file);
int rc = 0;

/* do not collect and update hash for digital signatures */
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -222,7 +222,7 @@ static int process_measurement(struct fi
if ((action & IMA_APPRAISE_SUBMASK) ||
strcmp(template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0)
/* read 'security.ima' */
- xattr_len = ima_read_xattr(file->f_path.dentry, &xattr_value);
+ xattr_len = ima_read_xattr(file_dentry(file), &xattr_value);

hash_algo = ima_get_hash_algo(xattr_value, xattr_len);
Greg Kroah-Hartman
2016-10-14 12:57:26 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Rutland <***@arm.com>

commit b5e7307d9d5a340d2c9fabbe1cee137d4c682c71 upstream.

In some places, dump_backtrace() is called with a NULL tsk parameter,
e.g. in bug_handler() in arch/arm64, or indirectly via show_stack() in
core code. The expectation is that this is treated as if current were
passed instead of NULL. Similar is true of unwind_frame().

Commit a80a0eb70c358f8c ("arm64: make irq_stack_ptr more robust") didn't
take this into account. In dump_backtrace() it compares tsk against
current *before* we check if tsk is NULL, and in unwind_frame() we never
set tsk if it is NULL.

Due to this, we won't initialise irq_stack_ptr in either function. In
dump_backtrace() this results in calling dump_mem() for memory
immediately above the IRQ stack range, rather than for the relevant
range on the task stack. In unwind_frame we'll reject unwinding frames
on the IRQ stack.

In either case this results in incomplete or misleading backtrace
information, but is not otherwise problematic. The initial percpu areas
(including the IRQ stacks) are allocated in the linear map, and dump_mem
uses __get_user(), so we shouldn't access anything with side-effects,
and will handle holes safely.

This patch fixes the issue by having both functions handle the NULL tsk
case before doing anything else with tsk.

Signed-off-by: Mark Rutland <***@arm.com>
Fixes: a80a0eb70c358f8c ("arm64: make irq_stack_ptr more robust")
Acked-by: James Morse <***@arm.com>
Cc: Catalin Marinas <***@arm.com>
Cc: Will Deacon <***@arm.com>
Cc: Yang Shi <***@linaro.org>
Signed-off-by: Will Deacon <***@arm.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/arm64/kernel/stacktrace.c | 5 ++++-
arch/arm64/kernel/traps.c | 10 +++++-----
2 files changed, 9 insertions(+), 6 deletions(-)

--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -43,6 +43,9 @@ int notrace unwind_frame(struct task_str
unsigned long fp = frame->fp;
unsigned long irq_stack_ptr;

+ if (!tsk)
+ tsk = current;
+
/*
* Switching between stacks is valid when tracing current and in
* non-preemptible context.
@@ -67,7 +70,7 @@ int notrace unwind_frame(struct task_str
frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- if (tsk && tsk->ret_stack &&
+ if (tsk->ret_stack &&
(frame->pc == (unsigned long)return_to_handler)) {
/*
* This is a case where function graph tracer has
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -149,6 +149,11 @@ static void dump_backtrace(struct pt_reg
unsigned long irq_stack_ptr;
int skip;

+ pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+ if (!tsk)
+ tsk = current;
+
/*
* Switching between stacks is valid when tracing current and in
* non-preemptible context.
@@ -158,11 +163,6 @@ static void dump_backtrace(struct pt_reg
else
irq_stack_ptr = 0;

- pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
-
- if (!tsk)
- tsk = current;
-
if (tsk == current) {
frame.fp = (unsigned long)__builtin_frame_address(0);
frame.sp = current_stack_pointer;
Greg Kroah-Hartman
2016-10-14 12:57:38 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <***@oracle.com>

commit ac0e89bb4744d3882ccd275f2416d9ce22f4e1e7 upstream.

We use logical negate where bitwise negate was intended. It means that
we never return -EINVAL here.

Fixes: ce11e48b7fdd ('KVM: PPC: E500: Add userspace debug stub support')
Signed-off-by: Dan Carpenter <***@oracle.com>
Reviewed-by: Alexander Graf <***@suse.de>
Signed-off-by: Paul Mackerras <***@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/powerpc/kvm/booke.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -2038,7 +2038,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(
if (type == KVMPPC_DEBUG_NONE)
continue;

- if (type & !(KVMPPC_DEBUG_WATCH_READ |
+ if (type & ~(KVMPPC_DEBUG_WATCH_READ |
KVMPPC_DEBUG_WATCH_WRITE |
KVMPPC_DEBUG_BREAKPOINT))
return -EINVAL;
Greg Kroah-Hartman
2016-10-14 12:57:49 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Hansen <***@intel.com>

commit d4b05923f579c234137317cdf9a5eb69ddab76d1 upstream.

Our XSAVE features are divided into two categories: those that
generate FPU exceptions, and those that do not. MPX and pkeys do
not generate FPU exceptions and thus can not be used lazily. We
disable them when lazy mode is forced on.

We have a pair of masks to collect these two sets of features, but
XFEATURE_MASK_PKRU was added to the wrong mask: XFEATURE_MASK_LAZY.
Fix it by moving the feature to XFEATURE_MASK_EAGER.

Note: this only causes problem if you boot with lazy FPU mode
(eagerfpu=off) which is *not* the default. It also only affects
hardware which is not currently publicly available. It looks like
eager mode is going away, but we still need this patch applied
to any kernel that has protection keys and lazy mode, which is 4.6
through 4.8 at this point, and 4.9 if the lazy removal isn't sent
to Linus for 4.9.

Fixes: c8df40098451 ("x86/fpu, x86/mm/pkeys: Add PKRU xsave fields and data structures")
Signed-off-by: Dave Hansen <***@intel.com>
Cc: Dave Hansen <***@sr71.net>
Link: http://lkml.kernel.org/r/***@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/include/asm/fpu/xstate.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -24,11 +24,12 @@
XFEATURE_MASK_YMM | \
XFEATURE_MASK_OPMASK | \
XFEATURE_MASK_ZMM_Hi256 | \
- XFEATURE_MASK_Hi16_ZMM | \
- XFEATURE_MASK_PKRU)
+ XFEATURE_MASK_Hi16_ZMM)

/* Supported features which require eager state saving */
-#define XFEATURE_MASK_EAGER (XFEATURE_MASK_BNDREGS | XFEATURE_MASK_BNDCSR)
+#define XFEATURE_MASK_EAGER (XFEATURE_MASK_BNDREGS | \
+ XFEATURE_MASK_BNDCSR | \
+ XFEATURE_MASK_PKRU)

/* All currently supported features */
#define XCNTXT_MASK (XFEATURE_MASK_LAZY | XFEATURE_MASK_EAGER)
Greg Kroah-Hartman
2016-10-14 12:58:02 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <***@linux.intel.com>

commit db91aa793ff984ac048e199ea1c54202543952fe upstream.

When a CPU is about to be offlined we call fixup_irqs() that resets IRQ
affinities related to the CPU in question. The same thing is also done when
the system is suspended to S-states like S3 (mem).

For each IRQ we try to complete any on-going move regardless whether the
IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch
its chip_data, assume it is of type struct apic_chip_data and manipulate it
by clearing old_domain mask etc. For irq_chips that are not part of the
x86_vector_domain, like those created by various GPIO drivers, will find
their chip_data being changed unexpectly.

Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets
corrupted after resume:

# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
gpio-511 ( |sysfs ) in hi

# rtcwake -s10 -mmem
<10 seconds passes>

# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
gpio-511 ( |sysfs ) in ?

Note '?' in the output. It means the struct gpio_chip ->get function is
NULL whereas before suspend it was there.

Fix this by first checking that the IRQ belongs to x86_vector_domain before
we try to use the chip_data as struct apic_chip_data.

Reported-and-tested-by: Sakari Ailus <***@linux.intel.com>
Signed-off-by: Mika Westerberg <***@linux.intel.com>
Link: http://lkml.kernel.org/r/20161003101708.34795-1-***@linux.intel.com
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/kernel/apic/vector.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -661,11 +661,28 @@ void irq_complete_move(struct irq_cfg *c
*/
void irq_force_complete_move(struct irq_desc *desc)
{
- struct irq_data *irqdata = irq_desc_get_irq_data(desc);
- struct apic_chip_data *data = apic_chip_data(irqdata);
- struct irq_cfg *cfg = data ? &data->cfg : NULL;
+ struct irq_data *irqdata;
+ struct apic_chip_data *data;
+ struct irq_cfg *cfg;
unsigned int cpu;

+ /*
+ * The function is called for all descriptors regardless of which
+ * irqdomain they belong to. For example if an IRQ is provided by
+ * an irq_chip as part of a GPIO driver, the chip data for that
+ * descriptor is specific to the irq_chip in question.
+ *
+ * Check first that the chip_data is what we expect
+ * (apic_chip_data) before touching it any further.
+ */
+ irqdata = irq_domain_get_irq_data(x86_vector_domain,
+ irq_desc_get_irq(desc));
+ if (!irqdata)
+ return;
+
+ data = apic_chip_data(irqdata);
+ cfg = data ? &data->cfg : NULL;
+
if (!cfg)
return;
Greg Kroah-Hartman
2016-10-14 12:58:18 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Iooss <***@m4x.org>

commit ba6d018e3d2f6a0fad58a668cadf66b2d1f80f59 upstream.

__show_regs() fails to dump the PKRU state when the debug registers are in
their default state because there is a return statement on the debug
register state.

Change the logic to report PKRU value even when debug registers are in
their default state.

Fixes:c0b17b5bd4b7 ("x86/mm/pkeys: Dump PKRU with other kernel registers")
Signed-off-by: Nicolas Iooss <***@m4x.org>
Acked-by: Dave Hansen <***@linux.intel.com>
Link: http://lkml.kernel.org/r/20160910183045.4618-1-***@m4x.org
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/kernel/process_64.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -110,12 +110,13 @@ void __show_regs(struct pt_regs *regs, i
get_debugreg(d7, 7);

/* Only print out debug registers if they are in their non-default state. */
- if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
- (d6 == DR6_RESERVED) && (d7 == 0x400))
- return;
-
- printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
- printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+ if (!((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
+ (d6 == DR6_RESERVED) && (d7 == 0x400))) {
+ printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n",
+ d0, d1, d2);
+ printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n",
+ d3, d6, d7);
+ }

if (boot_cpu_has(X86_FEATURE_OSPKE))
printk(KERN_DEFAULT "PKRU: %08x\n", read_pkru());
Greg Kroah-Hartman
2016-10-14 12:58:23 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoffer Dall <***@linaro.org>

commit 6fe407f2d18a4f94216263f91cb7d1f08fa5887c upstream.

If userspace creates a PMU for the VCPU, but doesn't create an in-kernel
irqchip, then we end up in a nasty path where we try to take an
uninitialized spinlock, which can lead to all sorts of breakages.

Luckily, QEMU always creates the VGIC before the PMU, so we can
establish this as ABI and check for the VGIC in the PMU init stage.
This can be relaxed at a later time if we want to support PMU with a
userspace irqchip.

Cc: Shannon Zhao <***@linaro.org>
Acked-by: Marc Zyngier <***@arm.com>
Signed-off-by: Christoffer Dall <***@linaro.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
Documentation/virtual/kvm/devices/vcpu.txt | 4 +++-
virt/kvm/arm/pmu.c | 8 ++++++++
2 files changed, 11 insertions(+), 1 deletion(-)

--- a/Documentation/virtual/kvm/devices/vcpu.txt
+++ b/Documentation/virtual/kvm/devices/vcpu.txt
@@ -30,4 +30,6 @@ Returns: -ENODEV: PMUv3 not supported
attribute
-EBUSY: PMUv3 already initialized

-Request the initialization of the PMUv3.
+Request the initialization of the PMUv3. This must be done after creating the
+in-kernel irqchip. Creating a PMU with a userspace irqchip is currently not
+supported.
--- a/virt/kvm/arm/pmu.c
+++ b/virt/kvm/arm/pmu.c
@@ -423,6 +423,14 @@ static int kvm_arm_pmu_v3_init(struct kv
if (!kvm_arm_support_pmu_v3())
return -ENODEV;

+ /*
+ * We currently require an in-kernel VGIC to use the PMU emulation,
+ * because we do not support forwarding PMU overflow interrupts to
+ * userspace yet.
+ */
+ if (!irqchip_in_kernel(vcpu->kvm) || !vgic_initialized(vcpu->kvm))
+ return -ENODEV;
+
if (!test_bit(KVM_ARM_VCPU_PMU_V3, vcpu->arch.features) ||
!kvm_arm_pmu_irq_initialized(vcpu))
return -ENXIO;
Greg Kroah-Hartman
2016-10-14 12:58:35 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <***@linux.intel.com>

commit d4816edfe706497a8525480c1685ceb9871bc118 upstream.

Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.

Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: Jarkko Sakkinen <***@linux.intel.com>
Reviewed-by: Jason Gunthorpe <***@obsidianresearch.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/char/tpm/tpm-dev.c | 2
drivers/char/tpm/tpm-interface.c | 51 ++++++++++---------
drivers/char/tpm/tpm-sysfs.c | 2
drivers/char/tpm/tpm.h | 12 +++-
drivers/char/tpm/tpm2-cmd.c | 101 +++++++++++++++++++++++++--------------
5 files changed, 103 insertions(+), 65 deletions(-)

--- a/drivers/char/tpm/tpm-dev.c
+++ b/drivers/char/tpm/tpm-dev.c
@@ -139,7 +139,7 @@ static ssize_t tpm_write(struct file *fi

/* atomic tpm command send and result receive */
out_size = tpm_transmit(priv->chip, priv->data_buffer,
- sizeof(priv->data_buffer));
+ sizeof(priv->data_buffer), 0);
if (out_size < 0) {
mutex_unlock(&priv->buffer_mutex);
return out_size;
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -330,8 +330,8 @@ EXPORT_SYMBOL_GPL(tpm_calc_ordinal_durat
/*
* Internal kernel interface to transmit TPM commands
*/
-ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
- size_t bufsiz)
+ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
+ unsigned int flags)
{
ssize_t rc;
u32 count, ordinal;
@@ -350,7 +350,8 @@ ssize_t tpm_transmit(struct tpm_chip *ch
return -E2BIG;
}

- mutex_lock(&chip->tpm_mutex);
+ if (!(flags & TPM_TRANSMIT_UNLOCKED))
+ mutex_lock(&chip->tpm_mutex);

rc = chip->ops->send(chip, (u8 *) buf, count);
if (rc < 0) {
@@ -393,20 +394,21 @@ out_recv:
dev_err(chip->pdev,
"tpm_transmit: tpm_recv: error %zd\n", rc);
out:
- mutex_unlock(&chip->tpm_mutex);
+ if (!(flags & TPM_TRANSMIT_UNLOCKED))
+ mutex_unlock(&chip->tpm_mutex);
return rc;
}

#define TPM_DIGEST_SIZE 20
#define TPM_RET_CODE_IDX 6

-ssize_t tpm_transmit_cmd(struct tpm_chip *chip, void *cmd,
- int len, const char *desc)
+ssize_t tpm_transmit_cmd(struct tpm_chip *chip, const void *cmd,
+ int len, unsigned int flags, const char *desc)
{
- struct tpm_output_header *header;
+ const struct tpm_output_header *header;
int err;

- len = tpm_transmit(chip, (u8 *) cmd, len);
+ len = tpm_transmit(chip, (const u8 *)cmd, len, flags);
if (len < 0)
return len;
else if (len < TPM_HEADER_SIZE)
@@ -454,7 +456,8 @@ ssize_t tpm_getcap(struct device *dev, _
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = subcap_id;
}
- rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, desc);
+ rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
+ desc);
if (!rc)
*cap = tpm_cmd.params.getcap_out.cap;
return rc;
@@ -470,7 +473,7 @@ void tpm_gen_interrupt(struct tpm_chip *
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;

- rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
+ rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
"attempting to determine the timeouts");
}
EXPORT_SYMBOL_GPL(tpm_gen_interrupt);
@@ -491,7 +494,7 @@ static int tpm_startup(struct tpm_chip *
start_cmd.header.in = tpm_startup_header;

start_cmd.params.startup_in.startup_type = startup_type;
- return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE,
+ return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
"attempting to start the TPM");
}

@@ -522,7 +525,8 @@ int tpm_get_timeouts(struct tpm_chip *ch
tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP;
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
- rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, NULL);
+ rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
+ NULL);

if (rc == TPM_ERR_INVALID_POSTINIT) {
/* The TPM is not started, we are the first to talk to it.
@@ -536,7 +540,7 @@ int tpm_get_timeouts(struct tpm_chip *ch
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
- NULL);
+ 0, NULL);
}
if (rc) {
dev_err(chip->pdev,
@@ -597,7 +601,7 @@ duration:
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_DURATION;

- rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
+ rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
"attempting to determine the durations");
if (rc)
return rc;
@@ -653,7 +657,7 @@ static int tpm_continue_selftest(struct
struct tpm_cmd_t cmd;

cmd.header.in = continue_selftest_header;
- rc = tpm_transmit_cmd(chip, &cmd, CONTINUE_SELFTEST_RESULT_SIZE,
+ rc = tpm_transmit_cmd(chip, &cmd, CONTINUE_SELFTEST_RESULT_SIZE, 0,
"continue selftest");
return rc;
}
@@ -673,7 +677,7 @@ int tpm_pcr_read_dev(struct tpm_chip *ch

cmd.header.in = pcrread_header;
cmd.params.pcrread_in.pcr_idx = cpu_to_be32(pcr_idx);
- rc = tpm_transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE,
+ rc = tpm_transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE, 0,
"attempting to read a pcr value");

if (rc == 0)
@@ -771,7 +775,7 @@ int tpm_pcr_extend(u32 chip_num, int pcr
cmd.header.in = pcrextend_header;
cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(pcr_idx);
memcpy(cmd.params.pcrextend_in.hash, hash, TPM_DIGEST_SIZE);
- rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE,
+ rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE, 0,
"attempting extend a PCR value");

tpm_chip_put(chip);
@@ -810,7 +814,7 @@ int tpm_do_selftest(struct tpm_chip *chi
/* Attempt to read a PCR value */
cmd.header.in = pcrread_header;
cmd.params.pcrread_in.pcr_idx = cpu_to_be32(0);
- rc = tpm_transmit(chip, (u8 *) &cmd, READ_PCR_RESULT_SIZE);
+ rc = tpm_transmit(chip, (u8 *) &cmd, READ_PCR_RESULT_SIZE, 0);
/* Some buggy TPMs will not respond to tpm_tis_ready() for
* around 300ms while the self test is ongoing, keep trying
* until the self test duration expires. */
@@ -851,7 +855,7 @@ int tpm_send(u32 chip_num, void *cmd, si
if (chip == NULL)
return -ENODEV;

- rc = tpm_transmit_cmd(chip, cmd, buflen, "attempting tpm_cmd");
+ rc = tpm_transmit_cmd(chip, cmd, buflen, 0, "attempting tpm_cmd");

tpm_chip_put(chip);
return rc;
@@ -953,14 +957,15 @@ int tpm_pm_suspend(struct device *dev)
cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(tpm_suspend_pcr);
memcpy(cmd.params.pcrextend_in.hash, dummy_hash,
TPM_DIGEST_SIZE);
- rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE,
+ rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE, 0,
"extending dummy pcr before suspend");
}

/* now do the actual savestate */
for (try = 0; try < TPM_RETRY; try++) {
cmd.header.in = savestate_header;
- rc = tpm_transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, NULL);
+ rc = tpm_transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, 0,
+ NULL);

/*
* If the TPM indicates that it is too busy to respond to
@@ -1044,8 +1049,8 @@ int tpm_get_random(u32 chip_num, u8 *out
tpm_cmd.params.getrandom_in.num_bytes = cpu_to_be32(num_bytes);

err = tpm_transmit_cmd(chip, &tpm_cmd,
- TPM_GETRANDOM_RESULT_SIZE + num_bytes,
- "attempting get random");
+ TPM_GETRANDOM_RESULT_SIZE + num_bytes,
+ 0, "attempting get random");
if (err)
break;

--- a/drivers/char/tpm/tpm-sysfs.c
+++ b/drivers/char/tpm/tpm-sysfs.c
@@ -39,7 +39,7 @@ static ssize_t pubek_show(struct device
struct tpm_chip *chip = dev_get_drvdata(dev);

tpm_cmd.header.in = tpm_readpubek_header;
- err = tpm_transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE,
+ err = tpm_transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE, 0,
"attempting to read the PUBEK");
if (err)
goto out;
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -494,11 +494,15 @@ extern struct class *tpm_class;
extern dev_t tpm_devt;
extern const struct file_operations tpm_fops;

+enum tpm_transmit_flags {
+ TPM_TRANSMIT_UNLOCKED = BIT(0),
+};
+
+ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
+ unsigned int flags);
+ssize_t tpm_transmit_cmd(struct tpm_chip *chip, const void *cmd, int len,
+ unsigned int flags, const char *desc);
ssize_t tpm_getcap(struct device *, __be32, cap_t *, const char *);
-ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
- size_t bufsiz);
-ssize_t tpm_transmit_cmd(struct tpm_chip *chip, void *cmd, int len,
- const char *desc);
extern int tpm_get_timeouts(struct tpm_chip *);
extern void tpm_gen_interrupt(struct tpm_chip *);
extern int tpm_do_selftest(struct tpm_chip *);
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -282,7 +282,7 @@ int tpm2_pcr_read(struct tpm_chip *chip,
sizeof(cmd.params.pcrread_in.pcr_select));
cmd.params.pcrread_in.pcr_select[pcr_idx >> 3] = 1 << (pcr_idx & 0x7);

- rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+ rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
"attempting to read a pcr value");
if (rc == 0) {
buf = cmd.params.pcrread_out.digest;
@@ -330,7 +330,7 @@ int tpm2_pcr_extend(struct tpm_chip *chi
cmd.params.pcrextend_in.hash_alg = cpu_to_be16(TPM2_ALG_SHA1);
memcpy(cmd.params.pcrextend_in.digest, hash, TPM_DIGEST_SIZE);

- rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+ rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
"attempting extend a PCR value");

return rc;
@@ -376,7 +376,7 @@ int tpm2_get_random(struct tpm_chip *chi
cmd.header.in = tpm2_getrandom_header;
cmd.params.getrandom_in.size = cpu_to_be16(num_bytes);

- err = tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+ err = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
"attempting get random");
if (err)
break;
@@ -434,12 +434,12 @@ static void tpm2_buf_append_auth(struct
}

/**
- * tpm2_seal_trusted() - seal a trusted key
- * @chip_num: A specific chip number for the request or TPM_ANY_NUM
- * @options: authentication values and other options
+ * tpm2_seal_trusted() - seal the payload of a trusted key
+ * @chip_num: TPM chip to use
* @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
*
- * Returns < 0 on error and 0 on success.
+ * Return: < 0 on error and 0 on success.
*/
int tpm2_seal_trusted(struct tpm_chip *chip,
struct trusted_key_payload *payload,
@@ -512,7 +512,7 @@ int tpm2_seal_trusted(struct tpm_chip *c
goto out;
}

- rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "sealing data");
+ rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, 0, "sealing data");
if (rc)
goto out;

@@ -538,10 +538,18 @@ out:
return rc;
}

-static int tpm2_load(struct tpm_chip *chip,
- struct trusted_key_payload *payload,
- struct trusted_key_options *options,
- u32 *blob_handle)
+/**
+ * tpm2_load_cmd() - execute a TPM2_Load command
+ * @chip_num: TPM chip to use
+ * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
+ *
+ * Return: same as with tpm_transmit_cmd
+ */
+static int tpm2_load_cmd(struct tpm_chip *chip,
+ struct trusted_key_payload *payload,
+ struct trusted_key_options *options,
+ u32 *blob_handle, unsigned int flags)
{
struct tpm_buf buf;
unsigned int private_len;
@@ -576,7 +584,7 @@ static int tpm2_load(struct tpm_chip *ch
goto out;
}

- rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "loading blob");
+ rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, flags, "loading blob");
if (!rc)
*blob_handle = be32_to_cpup(
(__be32 *) &buf.data[TPM_HEADER_SIZE]);
@@ -590,7 +598,16 @@ out:
return rc;
}

-static void tpm2_flush_context(struct tpm_chip *chip, u32 handle)
+/**
+ * tpm2_flush_context_cmd() - execute a TPM2_FlushContext command
+ * @chip_num: TPM chip to use
+ * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
+ *
+ * Return: same as with tpm_transmit_cmd
+ */
+static void tpm2_flush_context_cmd(struct tpm_chip *chip, u32 handle,
+ unsigned int flags)
{
struct tpm_buf buf;
int rc;
@@ -604,7 +621,8 @@ static void tpm2_flush_context(struct tp

tpm_buf_append_u32(&buf, handle);

- rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "flushing context");
+ rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, flags,
+ "flushing context");
if (rc)
dev_warn(chip->pdev, "0x%08x was not flushed, rc=%d\n", handle,
rc);
@@ -612,10 +630,18 @@ static void tpm2_flush_context(struct tp
tpm_buf_destroy(&buf);
}

-static int tpm2_unseal(struct tpm_chip *chip,
- struct trusted_key_payload *payload,
- struct trusted_key_options *options,
- u32 blob_handle)
+/**
+ * tpm2_unseal_cmd() - execute a TPM2_Unload command
+ * @chip_num: TPM chip to use
+ * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
+ *
+ * Return: same as with tpm_transmit_cmd
+ */
+static int tpm2_unseal_cmd(struct tpm_chip *chip,
+ struct trusted_key_payload *payload,
+ struct trusted_key_options *options,
+ u32 blob_handle, unsigned int flags)
{
struct tpm_buf buf;
u16 data_len;
@@ -635,7 +661,7 @@ static int tpm2_unseal(struct tpm_chip *
options->blobauth /* hmac */,
TPM_DIGEST_SIZE);

- rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "unsealing");
+ rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, flags, "unsealing");
if (rc > 0)
rc = -EPERM;

@@ -654,12 +680,12 @@ static int tpm2_unseal(struct tpm_chip *
}

/**
- * tpm_unseal_trusted() - unseal a trusted key
- * @chip_num: A specific chip number for the request or TPM_ANY_NUM
- * @options: authentication values and other options
+ * tpm_unseal_trusted() - unseal the payload of a trusted key
+ * @chip_num: TPM chip to use
* @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
*
- * Returns < 0 on error and 0 on success.
+ * Return: < 0 on error and 0 on success.
*/
int tpm2_unseal_trusted(struct tpm_chip *chip,
struct trusted_key_payload *payload,
@@ -668,14 +694,17 @@ int tpm2_unseal_trusted(struct tpm_chip
u32 blob_handle;
int rc;

- rc = tpm2_load(chip, payload, options, &blob_handle);
+ mutex_lock(&chip->tpm_mutex);
+ rc = tpm2_load_cmd(chip, payload, options, &blob_handle,
+ TPM_TRANSMIT_UNLOCKED);
if (rc)
- return rc;
-
- rc = tpm2_unseal(chip, payload, options, blob_handle);
-
- tpm2_flush_context(chip, blob_handle);
+ goto out;

+ rc = tpm2_unseal_cmd(chip, payload, options, blob_handle,
+ TPM_TRANSMIT_UNLOCKED);
+ tpm2_flush_context_cmd(chip, blob_handle, TPM_TRANSMIT_UNLOCKED);
+out:
+ mutex_unlock(&chip->tpm_mutex);
return rc;
}

@@ -701,7 +730,7 @@ ssize_t tpm2_get_tpm_pt(struct tpm_chip
cmd.params.get_tpm_pt_in.property_id = cpu_to_be32(property_id);
cmd.params.get_tpm_pt_in.property_cnt = cpu_to_be32(1);

- rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), desc);
+ rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0, desc);
if (!rc)
*value = be32_to_cpu(cmd.params.get_tpm_pt_out.value);

@@ -735,7 +764,7 @@ int tpm2_startup(struct tpm_chip *chip,
cmd.header.in = tpm2_startup_header;

cmd.params.startup_in.startup_type = cpu_to_be16(startup_type);
- return tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+ return tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
"attempting to start the TPM");
}
EXPORT_SYMBOL_GPL(tpm2_startup);
@@ -764,7 +793,7 @@ void tpm2_shutdown(struct tpm_chip *chip
cmd.header.in = tpm2_shutdown_header;
cmd.params.startup_in.startup_type = cpu_to_be16(shutdown_type);

- rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), "stopping the TPM");
+ rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0, "stopping the TPM");

/* In places where shutdown command is sent there's no much we can do
* except print the error code on a system failure.
@@ -830,7 +859,7 @@ static int tpm2_start_selftest(struct tp
cmd.header.in = tpm2_selftest_header;
cmd.params.selftest_in.full_test = full;

- rc = tpm_transmit_cmd(chip, &cmd, TPM2_SELF_TEST_IN_SIZE,
+ rc = tpm_transmit_cmd(chip, &cmd, TPM2_SELF_TEST_IN_SIZE, 0,
"continue selftest");

/* At least some prototype chips seem to give RC_TESTING error
@@ -882,7 +911,7 @@ int tpm2_do_selftest(struct tpm_chip *ch
cmd.params.pcrread_in.pcr_select[1] = 0x00;
cmd.params.pcrread_in.pcr_select[2] = 0x00;

- rc = tpm_transmit_cmd(chip, (u8 *) &cmd, sizeof(cmd), NULL);
+ rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0, NULL);
if (rc < 0)
break;

@@ -931,7 +960,7 @@ int tpm2_probe(struct tpm_chip *chip)
cmd.params.get_tpm_pt_in.property_id = cpu_to_be32(0x100);
cmd.params.get_tpm_pt_in.property_cnt = cpu_to_be32(1);

- rc = tpm_transmit(chip, (const char *) &cmd, sizeof(cmd));
+ rc = tpm_transmit(chip, (const u8 *)&cmd, sizeof(cmd), 0);
if (rc < 0)
return rc;
else if (rc < TPM_HEADER_SIZE)
Greg Kroah-Hartman
2016-10-14 13:16:09 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <***@linux.intel.com>

commit 72fd50e14e46dc0edf360631bdece87c2f066a97 upstream.

The req_canceled() callback is used by tpm_transmit() periodically to
check whether the request has been canceled while it is receiving a
response from the TPM.

The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel
callback, which has two consequences:

* Cancel might not happen.
* req_canceled() always returns zero.

A better place to clear the register is when starting to send a new
command. The behavior of TPM_CRB_CTRL_CANCEL is described in the
section 5.5.3.6 of the PTP specification.

Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <***@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/char/tpm/tpm_crb.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -142,6 +142,11 @@ static int crb_send(struct tpm_chip *chi
struct crb_priv *priv = chip->vendor.priv;
int rc = 0;

+ /* Zero the cancel register so that the next command will not get
+ * canceled.
+ */
+ iowrite32(0, &priv->cca->cancel);
+
if (len > ioread32(&priv->cca->cmd_size)) {
dev_err(&chip->dev,
"invalid command count value %x %zx\n",
@@ -175,8 +180,6 @@ static void crb_cancel(struct tpm_chip *

if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
dev_err(&chip->dev, "ACPI Start failed\n");
-
- iowrite32(0, &priv->cca->cancel);
}

static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
Greg Kroah-Hartman
2016-10-14 13:16:23 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <***@suse.de>

commit db68577966abc1aeae4ec597b3dcfa0d56e92041 upstream.

The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.

Reported-by: Enrico Mioso <***@gmail.com>
Tested-by: Enrico Mioso <***@gmail.com>
Signed-off-by: Takashi Iwai <***@suse.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
sound/pci/ali5451/ali5451.c | 2 ++
1 file changed, 2 insertions(+)

--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -1408,6 +1408,7 @@ snd_ali_playback_pointer(struct snd_pcm_
spin_unlock(&codec->reg_lock);
dev_dbg(codec->card->dev, "playback pointer returned cso=%xh.\n", cso);

+ cso %= runtime->buffer_size;
return cso;
}

@@ -1428,6 +1429,7 @@ static snd_pcm_uframes_t snd_ali_pointer
cso = inw(ALI_REG(codec, ALI_CSO_ALPHA_FMS + 2));
spin_unlock(&codec->reg_lock);

+ cso %= runtime->buffer_size;
return cso;
}
Greg Kroah-Hartman
2016-10-14 13:16:30 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Prarit Bhargava <***@redhat.com>

commit 2a51fe083eba7f99cbda72f5ef90cdf2f4df882c upstream.

When a CPU is physically added to a system then the MADT table is not
updated.

If subsequently a kdump kernel is started on that physically added CPU then
the ACPI enumeration fails to provide the information for this CPU which is
now the boot CPU of the kdump kernel.

As a consequence, generic_processor_info() is not invoked for that CPU so
the number of enumerated processors is 0 and none of the initializations,
including the logical package id management, are performed.

We have code which relies on the correctness of the logical package map and
other information which is initialized via generic_processor_info().
Executing such code will result in undefined behaviour or kernel crashes.

This problem applies only to the kdump kernel because a normal kexec will
switch to the original boot CPU, which is enumerated in MADT, before
jumping into the kexec kernel.

The boot code already has a check for num_processors equal 0 in
prefill_possible_map(). We can use that check as an indicator that the
enumeration of the boot CPU did not happen and invoke generic_processor_info()
for it. That initializes the relevant data for the boot CPU and therefore
prevents subsequent failure.

[ tglx: Refined the code and rewrote the changelog ]

Signed-off-by: Prarit Bhargava <***@redhat.com>
Fixes: 1f12e32f4cd5 ("x86/topology: Create logical package id")
Cc: Peter Zijlstra <***@infradead.org>
Cc: Len Brown <***@intel.com>
Cc: Borislav Petkov <***@suse.de>
Cc: Andi Kleen <***@linux.intel.com>
Cc: Jiri Olsa <***@redhat.com>
Cc: Juergen Gross <***@suse.com>
Cc: ***@redhat.com
Cc: Eric Biederman <***@xmission.com>
Cc: ***@lists.infradead.org
Link: http://lkml.kernel.org/r/1475514432-27682-1-git-send-email-***@redhat.com
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/kernel/smpboot.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1393,9 +1393,21 @@ __init void prefill_possible_map(void)
{
int i, possible;

- /* no processor from mptable or madt */
- if (!num_processors)
- num_processors = 1;
+ /* No boot processor was found in mptable or ACPI MADT */
+ if (!num_processors) {
+ int apicid = boot_cpu_physical_apicid;
+ int cpu = hard_smp_processor_id();
+
+ pr_warn("Boot CPU (id %d) not listed by BIOS\n", cpu);
+
+ /* Make sure boot cpu is enumerated */
+ if (apic->cpu_present_to_apicid(0) == BAD_APICID &&
+ apic->apic_id_valid(apicid))
+ generic_processor_info(apicid, boot_cpu_apic_version);
+
+ if (!num_processors)
+ num_processors = 1;
+ }

i = setup_max_cpus ?: 1;
if (setup_possible_cpus == -1) {
Greg Kroah-Hartman
2016-10-14 13:16:49 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Williams <***@intel.com>

commit 917db484dc6a69969d317b3e57add4208a8d9d42 upstream.

In commit:

ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")

Christoph references the original patch I wrote implementing pmem support.
The intent of the 'max_pfn' changes in that commit were to enable persistent
memory ranges to be covered by the struct page memmap by default.

However, that approach was abandoned when Christoph ported the patches [1], and
that functionality has since been replaced by devm_memremap_pages().

In the meantime, this max_pfn manipulation is confusing kdump [2] that
assumes that everything covered by the max_pfn is "System RAM". This
results in kdump hanging or crashing.

[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098

So fix it.

Reported-by: Zhang Yi <***@redhat.com>
Reported-by: Jeff Moyer <***@redhat.com>
Tested-by: Zhang Yi <***@redhat.com>
Signed-off-by: Dan Williams <***@intel.com>
Reviewed-by: Jeff Moyer <***@redhat.com>
Cc: Andrew Morton <***@linux-foundation.org>
Cc: Boaz Harrosh <***@plexistor.com>
Cc: Christoph Hellwig <***@lst.de>
Cc: Linus Torvalds <***@linux-foundation.org>
Cc: Peter Zijlstra <***@infradead.org>
Cc: Ross Zwisler <***@linux.intel.com>
Cc: Thomas Gleixner <***@linutronix.de>
Cc: linux-***@lists.01.org
Fixes: ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")
Link: http://lkml.kernel.org/r/***@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <***@kernel.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/kernel/e820.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)

--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -348,7 +348,7 @@ int __init sanitize_e820_map(struct e820
* continue building up new bios map based on this
* information
*/
- if (current_type != last_type || current_type == E820_PRAM) {
+ if (current_type != last_type) {
if (last_type != 0) {
new_bios[new_bios_entry].size =
change_point[chgidx]->addr - last_addr;
@@ -754,7 +754,7 @@ u64 __init early_reserve_e820(u64 size,
/*
* Find the highest page frame number we have available
*/
-static unsigned long __init e820_end_pfn(unsigned long limit_pfn)
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
{
int i;
unsigned long last_pfn = 0;
@@ -765,11 +765,7 @@ static unsigned long __init e820_end_pfn
unsigned long start_pfn;
unsigned long end_pfn;

- /*
- * Persistent memory is accounted as ram for purposes of
- * establishing max_pfn and mem_map.
- */
- if (ei->type != E820_RAM && ei->type != E820_PRAM)
+ if (ei->type != type)
continue;

start_pfn = ei->addr >> PAGE_SHIFT;
@@ -794,12 +790,12 @@ static unsigned long __init e820_end_pfn
}
unsigned long __init e820_end_of_ram_pfn(void)
{
- return e820_end_pfn(MAX_ARCH_PFN);
+ return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
}

unsigned long __init e820_end_of_low_ram_pfn(void)
{
- return e820_end_pfn(1UL << (32-PAGE_SHIFT));
+ return e820_end_pfn(1UL << (32 - PAGE_SHIFT), E820_RAM);
}

static void early_panic(char *msg)
Greg Kroah-Hartman
2016-10-14 13:17:05 UTC
Permalink
4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Denys Vlasenko <***@redhat.com>

commit cff9ab2b291e64259d97add48fe073c081afe4e2 upstream.

The array has a size of MAX_LOCAL_APIC, which can be as large as 32k, so it
can consume up to 128k.

The array has been there forever and was never used for anything useful
other than a version mismatch check which was introduced in 2009.

There is no reason to store the version in an array. The kernel is not
prepared to handle different APIC versions anyway, so the real important
part is to detect a version mismatch and warn about it, which can be done
with a single variable as well.

[ tglx: Massaged changelog ]

Signed-off-by: Denys Vlasenko <***@redhat.com>
CC: Andy Lutomirski <***@amacapital.net>
CC: Borislav Petkov <***@alien8.de>
CC: Brian Gerst <***@gmail.com>
CC: Mike Travis <***@sgi.com>
Link: http://lkml.kernel.org/r/20160913181232.30815-1-***@redhat.com
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
arch/x86/include/asm/mpspec.h | 2 +-
arch/x86/kernel/acpi/boot.c | 2 +-
arch/x86/kernel/apic/apic.c | 17 +++++++----------
arch/x86/kernel/apic/io_apic.c | 4 ++--
arch/x86/kernel/apic/probe_32.c | 2 +-
arch/x86/kernel/smpboot.c | 10 +++++-----
6 files changed, 17 insertions(+), 20 deletions(-)

--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -6,7 +6,6 @@
#include <asm/x86_init.h>
#include <asm/apicdef.h>

-extern int apic_version[];
extern int pic_mode;

#ifdef CONFIG_X86_32
@@ -40,6 +39,7 @@ extern int mp_bus_id_to_type[MAX_MP_BUSS
extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);

extern unsigned int boot_cpu_physical_apicid;
+extern u8 boot_cpu_apic_version;
extern unsigned long mp_lapic_addr;

#ifdef CONFIG_X86_LOCAL_APIC
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -180,7 +180,7 @@ static int acpi_register_lapic(int id, u
}

if (boot_cpu_physical_apicid != -1U)
- ver = apic_version[boot_cpu_physical_apicid];
+ ver = boot_cpu_apic_version;

return generic_processor_info(id, ver);
}
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -64,6 +64,8 @@ unsigned disabled_cpus;
unsigned int boot_cpu_physical_apicid = -1U;
EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);

+u8 boot_cpu_apic_version;
+
/*
* The highest APIC ID seen during enumeration.
*/
@@ -1790,8 +1792,7 @@ void __init init_apic_mappings(void)
* since smp_sanity_check is prepared for such a case
* and disable smp mode
*/
- apic_version[new_apicid] =
- GET_APIC_VERSION(apic_read(APIC_LVR));
+ boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
}
}

@@ -1806,13 +1807,10 @@ void __init register_lapic_address(unsig
}
if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = read_apic_id();
- apic_version[boot_cpu_physical_apicid] =
- GET_APIC_VERSION(apic_read(APIC_LVR));
+ boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
}
}

-int apic_version[MAX_LOCAL_APIC];
-
/*
* Local APIC interrupts
*/
@@ -2102,11 +2100,10 @@ int generic_processor_info(int apicid, i
cpu, apicid);
version = 0x10;
}
- apic_version[apicid] = version;

- if (version != apic_version[boot_cpu_physical_apicid]) {
+ if (version != boot_cpu_apic_version) {
pr_warning("BIOS bug: APIC version mismatch, boot CPU: %x, CPU %d: version %x\n",
- apic_version[boot_cpu_physical_apicid], cpu, version);
+ boot_cpu_apic_version, cpu, version);
}

physid_set(apicid, phys_cpu_present_map);
@@ -2249,7 +2246,7 @@ int __init APIC_init_uniprocessor(void)
* Complain if the BIOS pretends there is one.
*/
if (!boot_cpu_has(X86_FEATURE_APIC) &&
- APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ APIC_INTEGRATED(boot_cpu_apic_version)) {
pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
boot_cpu_physical_apicid);
return -1;
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1592,7 +1592,7 @@ void __init setup_ioapic_ids_from_mpc(vo
* no meaning without the serial APIC bus.
*/
if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
- || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ || APIC_XAPIC(boot_cpu_apic_version))
return;
setup_ioapic_ids_from_mpc_nocheck();
}
@@ -2422,7 +2422,7 @@ static int io_apic_get_unique_id(int ioa
static u8 io_apic_unique_id(int idx, u8 id)
{
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ !APIC_XAPIC(boot_cpu_apic_version))
return io_apic_get_unique_id(idx, id);
else
return id;
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -153,7 +153,7 @@ early_param("apic", parse_apic);

void __init default_setup_apic_routing(void)
{
- int version = apic_version[boot_cpu_physical_apicid];
+ int version = boot_cpu_apic_version;

if (num_possible_cpus() > 8) {
switch (boot_cpu_data.x86_vendor) {
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -676,7 +676,7 @@ wakeup_secondary_cpu_via_nmi(int apicid,
* Give the other CPU some time to accept the IPI.
*/
udelay(200);
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ if (APIC_INTEGRATED(boot_cpu_apic_version)) {
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
@@ -703,7 +703,7 @@ wakeup_secondary_cpu_via_init(int phys_a
/*
* Be paranoid about clearing APIC errors.
*/
- if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+ if (APIC_INTEGRATED(boot_cpu_apic_version)) {
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
@@ -742,7 +742,7 @@ wakeup_secondary_cpu_via_init(int phys_a
* Determine this based on the APIC version.
* If we don't have an integrated APIC, don't send the STARTUP IPIs.
*/
- if (APIC_INTEGRATED(apic_version[phys_apicid]))
+ if (APIC_INTEGRATED(boot_cpu_apic_version))
num_starts = 2;
else
num_starts = 0;
@@ -980,7 +980,7 @@ static int do_boot_cpu(int apicid, int c
/*
* Be paranoid about clearing APIC errors.
*/
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ if (APIC_INTEGRATED(boot_cpu_apic_version)) {
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
}
@@ -1235,7 +1235,7 @@ static int __init smp_sanity_check(unsig
/*
* If we couldn't find a local APIC, then get out of here now!
*/
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+ if (APIC_INTEGRATED(boot_cpu_apic_version) &&
!boot_cpu_has(X86_FEATURE_APIC)) {
if (!disable_apic) {
pr_err("BIOS bug, local APIC #%d not detected!...\n",

Loading...